Fabrication and machining performance of powder compacted alumina based cutting tool
This study focuses on the fabrication of alumina based cutting tool for machining application. Specific weight of alumina powders were pressed in a mold using hydraulic press at 8 tons before compressed through Cold Isostatic Press (CIP) at 30000 psi. Green body then was dried and sintered at 17...
Saved in:
Main Authors: | Abu Bakar, Hadzley, Fahmi, Naim, Mokhtar, Faiz, Tamin, Norfauzi, Azlan, Umar, Adam, Abdul Aziz, Izamshah, Raja, Kasim, Shahir |
---|---|
Format: | Conference or Workshop Item |
Language: | English |
Published: |
2018
|
Subjects: | |
Online Access: | http://eprints.uthm.edu.my/7223/1/P13899_db5aed9757f6adc7be9b7c3828ffbfc8.pdf http://eprints.uthm.edu.my/7223/ https://doi.org/10.1051/matecconf/201815004009 |
Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
Similar Items
-
Fabrication And Machining Performance Of Powder Compacted Alumina Based Cutting Tool
by: Abu Bakar, Mohd Hadzley, et al.
Published: (2018) -
Effect of hydraulic pressure on hardness, density, tool wear and surface roughness in the fabrication of alumina based cutting tool
by: M. M., Faiz, et al.
Published: (2018) -
Development And Performance Analysis Of Alumina-Yttria Stabilized Zirconia-Chromia Cutting Tool For High Wear Performance
by: Tamin, Norfauzi
Published: (2020) -
Effect of sintering temperature on density, hardness and tool wear for alumina-zirconia cutting tool
by: A. B., Hadzley, et al.
Published: (2019) -
Friction and wear analysis of ceramic cutting tool made from
Alumina-Zirconia-Chromia
by: Azhar, Anis Afuza, et al.
Published: (2020)