The influence of slag and PSAC on the wear resistance of composite aluminium
This research involves the fabrication of aluminum composite by using Palm Shell Activated Carbon (PSAC) and Boiler Slag as reinforcements. The method used is powder metallurgy. For aluminum composite fabrication process, set compaction pressure of 200 MPa and sintering temperature was at 500°c and...
Saved in:
Main Author: | Sulaiman, Zulkifli |
---|---|
Format: | Thesis |
Language: | English English |
Published: |
2013
|
Subjects: | |
Online Access: | http://eprints.uthm.edu.my/6646/1/24p%20ZULKIFLI%20SULAIMAN.pdf http://eprints.uthm.edu.my/6646/2/ZULKIFLI%20SULAIMAN%20WATERMARK.pdf http://eprints.uthm.edu.my/6646/ |
Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
Similar Items
-
The influence of slag and PSAC on the wear resistance of composite aluminium
by: Sulaiman, Zulkifli
Published: (2013) -
Effect Of Heat Treatment And Equal Channel Angular Pressing On The Microstructures, Hardness And Wear Resistance Of A356 Aluminium Alloy With Tib2
by: Syukron, Muhammad
Published: (2016) -
Effect of carburisation process on the wear of steel
by: Roonie Protasius
Published: (2016) -
Influence of deposition parameter to wear behaviour of tungsten carbide-nickel (WC-Ni) high velocity oxyfuel (HVOF) coating
by: Abdul Patar, Mohd Affifudin, et al.
Published: (2018) -
Characterization of cyclic plasticity type wear mechanism for titanium alloy, TI-6AL-4V on reciprocating sliding wear test
by: Mohd Harun, Dalila
Published: (2020)