Measurement of agarwood using magnetic induction mechanism
Aquilaria malaccensis (agarwood) in Malaysia is well known as “gaharu” and is a scented tree that produces fragrant resinous wood. Agarwood is a high-value wood that has extensive uses as perfumes, incense, and medicine. Due to its economic value and high demand from the industry, agarwood has...
Saved in:
Main Author: | |
---|---|
Format: | Thesis |
Language: | English English English |
Published: |
2021
|
Subjects: | |
Online Access: | http://eprints.uthm.edu.my/6457/1/24p%20NURFARAHIN%20ISHAK.pdf http://eprints.uthm.edu.my/6457/2/NURFARAHIN%20ISHAK%20COPYRIGHT%20DECLARATION.pdf http://eprints.uthm.edu.my/6457/3/NURFARAHIN%20ISHAK%20WATERMARK.pdf http://eprints.uthm.edu.my/6457/ |
Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
Summary: | Aquilaria malaccensis (agarwood) in Malaysia is well known as “gaharu” and is a
scented tree that produces fragrant resinous wood. Agarwood is a high-value wood
that has extensive uses as perfumes, incense, and medicine. Due to its economic value
and high demand from the industry, agarwood has been exposed to exploitation by
agarwood hunters. The usual method of obtaining agarwood is cutting down the whole
tree without examining the existence of agarwood. This may lead to natural treasure
loss, money loss, and species extinction. To prevent these losses, a non-destructive
method is desirable to replace the usual method. Magnetic induction mechanism is
introduced as a non-destructive method to detect the formation of agarwood. This
technique offers a great deal to visualise the distribution of electrical impedance.
Developing the elemental magnetic circuit started with obtaining the dielectric
properties via the open-ended coaxial probe method. The open-ended coaxial probe
method had a limited frequency of between 200 MHz and 1 GHz. Therefore, the data
underwent extrapolation for the target frequency of 10 MHz. These data were used to
observe the agarwood reaction in a virtual simulation. Second, a virtual magnetic
induction using COMSOL simulation was constructed, with 10 MHz frequency being
used as the transmission frequency. There were two main observations conducted for
this simulation, which were magnetic field and induced current. In COMSOL
simulation, also observed were the parameters for designing the coils. Coil diameter
and coil layers gave a great impact on the performance of the magnetic field and
induced current. Lastly, an elemental transceiver circuit was designed. The peak-to�peak voltage was observed to see the voltage changes between the transmitter and the
receiver. The magnetic induction circuit was successfully able to sense frequency
changes. The voltage readings for the sample without agarwood were high (1.02 V–
1.30 V) compared with samples with agarwood formation, whose voltage readings
were low (Sample A: 976 mV–1.20 V, Sample B: 940 mV–1.17 V, Sample C: 840m
V–1.18 V). |
---|