Performance of modified jatropha oil in combination with hexagonal boron nitride particles as a bio-based lubricant for green machining

• Main Authors: Talib, N., Rahim, E.A.
• Format: Article
• Language: English
• Published: ScienceDirect 2018
• Subjects: TJ1040-1119 Machinery exclusive of prime movers
• Online Access: http://eprints.uthm.edu.my/4638/1/AJ%202018%20%28115%29.pdf; http://eprints.uthm.edu.my/4638/; https://doi.org/10.1016/j.triboint.2017.09.016

This study evaluates the machining performance of newly developed modified jatropha oils (MJO1, MJO3 and MJO5), both with and without hexagonal boron nitride (hBN) particles (ranging between 0.05 and 0.5 wt%) during turning of AISI 1045 using minimum quantity lubrication (MQL). The experimental results indicated that, viscosity improved with the increase in MJOs molar ratio and hBN concentration. Excellent tribological behaviours is found to correlated with a better machining performance were achieved by MJO5a with 0.05 wt%. The MJO5a sample showed the lowest values of cutting force, cutting temperature and surface roughness, with a prolonged tool life and less tool wear, qualifying itself to be a potential alternative to the synthetic ester, with regard to the environmental concern.