Kajian terhadap sifat mekanik bagi jenis corak pengisian dalam proses pembuatan tiga demensi
This project is regarding the study of mechanical properties that have on the model that produced by Makerbot Replicator 2 machine. This machine apply Fused Deposition Modelling (FDM) technology where the 3D model fabricate with different infill pattern such hexagonal, linear, marrocanstar and...
Saved in:
| Main Author: | |
|---|---|
| Format: | Thesis |
| Language: | English English English |
| Published: |
2014
|
| Subjects: | |
| Online Access: | http://eprints.uthm.edu.my/1582/1/24p%20MUHAMAD%20KHAIRY%20SHAMSUDIN.pdf http://eprints.uthm.edu.my/1582/2/MUHAMAD%20KHAIRY%20SHAMSUDIN%20COPYRIGHT%20DECLARATION.pdf http://eprints.uthm.edu.my/1582/3/MUHAMAD%20KHAIRY%20SHAMSUDIN%20WATERMARK.pdf http://eprints.uthm.edu.my/1582/ |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Summary: | This project is regarding the study of mechanical properties that have on the model
that produced by Makerbot Replicator 2 machine. This machine apply Fused
Deposition Modelling (FDM) technology where the 3D model fabricate with
different infill pattern such hexagonal, linear, marrocanstar and catfill. The
determination of percentage infill is 20%, 40%, 60% and 80%. All spesimen are
fabricate according to the ISO standard for tensile test and flexure test. The results
show that marrocanstar have high tensile strength with value 589.41N for maximum
force and percentage infill at 80%, while for flexure strength, infill pattern
marrocanstar with value 108.82N at percentage infill 40%. |
|---|