The utilization of backgrounds as radiating elements to construct multibeam radial line slot array (RLSA) antennas
RLSA antennas normally have a single beam produced by slots installed on their radiating element. A technique was, therefore, introduced in this study to optimally design multibeam RLSA antennas. This involved the utilization of the antennas’ background to radiate signals by installing slots on it j...
Saved in:
Main Authors: | , , , |
---|---|
Format: | Article |
Language: | English |
Published: |
Praise Worthy Prize
2021
|
Online Access: | http://eprints.utem.edu.my/id/eprint/26512/2/2021%20THE%20UTILIZATION%20OF%20BACKGROUNDS%20AS%20RADIATING%20ELEMENTS%20TO%20CONSTRUCT%20MULTIBEAM%20RADIAL%20LINE%20SLOT%20ARRAY%20%28RLSA%29%20ANTENNAS.PDF http://eprints.utem.edu.my/id/eprint/26512/ https://www.praiseworthyprize.org/jsm/index.php?journal=irecap&page=article&op=view&path%5B%5D=25407 https://doi.org/10.15866/irecap.v11i2.20115 |
Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
Summary: | RLSA antennas normally have a single beam produced by slots installed on their radiating element. A technique was, therefore, introduced in this study to optimally design multibeam RLSA antennas. This involved the utilization of the antennas’ background to radiate signals by installing slots on it just like the radiating element to ensure the creation of multibeam after which the effects of this method such as signal flow disturbances and gain reduction were
discussed. Moreover, 105 multibeam RLSA models were designed and simulated to verify the technique developed after which a prototype of the best model was fabricated and measured to verify
the simulation. The result showed it is possible to obtain multibeam antennas with similar symmetry in terms of beamwidth and directions. Furthermore, the gain recorded for beams 1, 2, 3, and 4 was 8.28 dBi, 6.28 dBi, 6.38 dBi, and 8.18 dBi respectively, and were averagely about 6 dB lower than the value for single beam RLSA antennas, therefore, they suit the theory of beam splitting. The
antennas were also found to have more than enough bandwidth and good reflection coefficient and the technique’s validity was verified by a strong agreement between the simulation and measurement
results. |
---|