Temperature Control Of The 25kw Parabolic Dish-Stirling Engine System
Nowadays, even though many researchers continue to investigate and study about Parabolic Dish based on Concentration Solar Power (CSP), the findings are not conclusive and do not provide accurate evidence and proof on the potential of CSP development in Malaysia. The missing link in the Parabolic Di...
Saved in:
| Main Authors: | , , , |
|---|---|
| Format: | Article |
| Language: | English |
| Published: |
Universitas Ahmad Dahlan (UAD) and Institute of Advanced Engineering and Science (IAES)
2016
|
| Online Access: | http://eprints.utem.edu.my/id/eprint/18437/2/4055-9918-1-PB%281%29.pdf http://eprints.utem.edu.my/id/eprint/18437/ http://journal.uad.ac.id/index.php/TELKOMNIKA/article/view/4055/2713 http://dx.doi.org/10.12928/telkomnika.v14i3.4055 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Summary: | Nowadays, even though many researchers continue to investigate and study about Parabolic Dish based on Concentration Solar Power (CSP), the findings are not conclusive and do not provide accurate evidence and proof on the potential of CSP development in Malaysia. The missing link in the Parabolic Dish (PD) Stirling Engine system modelled is the control systems, which vary the amount of working gas in the Stirling engine. The temperature of the heater in PD system which has been modelled is overheated and causes damage to the heater material, low output efficiency, high thermal losses and
effect to the lifespan of the PD system. Therefore, the primary aim of this paper was to design a control system to maximize output efficiency during a normal operation by maintaining the heater/absorber temperature at the highest safe operating point and preventing excessive range of threshold to prevent damage to the heater material. |
|---|