Effect of high-speed parameters on uncoated carbide tool in finish turning Titanium Ti-6Al-4V ELI
In this work, the Sandvik uncoated carbide insert, CNGG 120408-SGF-H13A was used as a cutting tool in high-speed turning of titanium alloy Ti-6Al-4V ELI (extra-low interstitial) with hardness of 32 HRC. Wear is one of the problems that cannot be avoided in machining process. Therefore, the objective...
Saved in:
Main Authors: | Sulaiman, Mohd Amri, Kasim, Mohd Shahir |
---|---|
Format: | Article |
Language: | English |
Published: |
Penerbit Universiti Kebangsaan Malaysia
2014
|
Subjects: | |
Online Access: | http://eprints.utem.edu.my/id/eprint/14781/1/M.A._Sulaiman.pdf http://eprints.utem.edu.my/id/eprint/14781/ http://www.ukm.my/jsm |
Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
Similar Items
-
Effect of High-speed Parameters on Uncoated Carbide Tool in
Finish Turning Titanium Ti-6Al-4V ELI
by: Sulaiman, Mohd Amri, et al.
Published: (2014) -
Effect of high-speed parameters on uncoated carbide tool
in finish turning titanium Ti-6Al-4V ELI
by: Sulaiman, M.A., et al.
Published: (2014) -
Surface roughness analysis on titanium alloy Ti-6AI-4V ELI during turning with uncoated carbide insert
by: Mastuki, Ammar Aizat
Published: (2019) -
Performance Of Carbide Tool In High Speed Turning Of TI-6AL-4V ELI Under Conventional Coolant And Minimal Quantity Lubrication
by: Che Haron, Che Hassan, et al.
Published: (2016) -
Optimization of carbide tool performance under dry conditions in turning titanium alloy Ti-6A-4V ELI
by: Adam, Muhamad Alif
Published: (2023)