Structure optimization of 6 slot 8 pole permanent magnet linear motor

• Main Authors: Abdul Shukor, Fairul Azhar, Misron, Norhisam, Wakiwaka, Hiroyuki, Tashiro, Kunihisa, Nirei , Masami
• Format: Conference or Workshop Item
• Published: 2014
• Subjects: TK Electrical engineering. Electronics Nuclear engineering
• Online Access: http://eprints.utem.edu.my/id/eprint/14120/

Palm oil has become the most consumed vegetable oil. In order to ensure its sustainability, the productivity of oil palms is targeted to increase by about 3.5% each year. Mechanization is one method to improve the oil palm productivity. Most activities in the oil palm process have been mechanized, and the mechanization of the harvesting process still need to be established. Tools to this end have been introduced by the Malaysian Palm Oil Board (MPOB) in Malaysia with the introduction of the CantasTM, however, due to their operational limitations, the E-cutter was later introduced. In this paper, the design of the E-cutter’s actuator is discussed. The design targets of the actuator are also briefly explained. In the end, an E-cutter’s actuator with 218 N of average thrust, Fave and a total weight, W, of 1.8 kg has been designed. The performance of the E-cutter’s actuator is also compared to a commercialized linear motor to prove its high performance.