The Influence Of Cutting Parameter On Heat Generation In High-Speed Milling Inconel 718 Under MQL Condition
The paper presents a studyof the effect of operating variable parameter; cutting speed, feed rate, depth of cut and width of cut on heat being generated when end milling under MQL condition. The response surface methodology (RSM) was employed in the experiment, and a Box–Behnken design was used to d...
Saved in:
Main Authors: | Kasim, Mohd Shahir, Raja Abdullah, Raja Izamshah, Md Ali, Mohd Amran, Abdul Aziz, Mohd Sanusi, Mohd Abid, Mohd Asyadi 'Azam, Che Haron, Che Hassan, A Ghani, Jaharah |
---|---|
Format: | Article |
Language: | English |
Published: |
CSIR
2014
|
Online Access: | http://eprints.utem.edu.my/id/eprint/11044/1/JSIR_73%281%29_62-65.pdf http://eprints.utem.edu.my/id/eprint/11044/ http://nopr.niscair.res.in/handle/123456789/25433 |
Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
Similar Items
-
Effect Of Cutting Speed On The Carbide Cutting Tool In Milling Inconel 718 Alloy
by: Abdul Hadi, Musfirah, et al.
Published: (2016) -
Assessment of environmental friendly application of biodegradable MQL coolant in end milling of Inconel 718
by: Kasim, Mohd Shahir, et al.
Published: (2013) -
Prediction Of Cutting Force In End Milling Of Inconel 718
by: Kasim, Mohd Shahir, et al.
Published: (2014) -
Prediction of Cutting Force in End Milling of Inconel 718
by: Kasim, Mohd Shahir, et al.
Published: (2013) -
Prediction Surface Roughness in High-Speed Milling of Inconel 718 Under Mql Using Rsm Method
by: Kasim, Mohd Shahir, et al.
Published: (2013)