Optimization Of Injection Molding Parameters Fo Production Of Polypropylene Plastic Tray Using Taguchi Method
In this study, the Taguchi method as a powerful design of experiments (DOE) tool developed by G. Taguchi is used to find the optimal process parameters for Battenfeld TM750/210 injection molding machine that was used to produce polypropylene (PP) plastic tray. Therefore, an orthogonal array (O...
Saved in:
| Main Author: | |
|---|---|
| Format: | Monograph |
| Language: | English |
| Published: |
Universiti Sains Malaysia
2005
|
| Subjects: | |
| Online Access: | http://eprints.usm.my/58201/1/Optimization%20Of%20Injection%20Molding%20Parameters%20Fo%20Production%20Of%20Polypropylene%20Plastic%20Tray%20Using%20Taguchi%20Method.pdf http://eprints.usm.my/58201/ |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Summary: | In this study, the Taguchi method as a powerful design of experiments (DOE) tool
developed by G. Taguchi is used to find the optimal process parameters for Battenfeld
TM750/210 injection molding machine that was used to produce polypropylene (PP)
plastic tray. Therefore, an orthogonal array (OA), main effect, the signal-to-noise (S/N)
ratio, and analysis of variance (ANOVA) are employed to investigate the process
parameters in order to achieve optimum bending deflection performance and optimum
shrinkage behavior of a PP plastic tray so as to get maximum bending strength and
minimum shrinkage respectively. Through this study, not only can the optimal process
parameters for injection molding process be obtained, but also the main process parameters
that affect the bending performance and shrinkage behavior of the PP plastic tray can be
found respectively. Experimental results are provided to confirm the effectiveness of this
approach. |
|---|