Titanium dioxide-based thick film gas sensor for hydrogen detection
The need in detecting hazardous gases such as hydrogen has led to the development of simple, reliable and low cost of gas sensor for environmental monitoring and human safety. Excess amount of hydrogen in air can cause explosion, while longer exposure to the h...
Saved in:
Main Author: | |
---|---|
Format: | Thesis |
Language: | English |
Published: |
2020
|
Subjects: | |
Online Access: | http://psasir.upm.edu.my/id/eprint/90787/1/ITMA%202020%207%20-%20IR.pdf http://psasir.upm.edu.my/id/eprint/90787/ |
Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
Summary: | The need in detecting hazardous gases such as hydrogen has led to the development of
simple, reliable and low cost of gas sensor for environmental monitoring and human
safety. Excess amount of hydrogen in air can cause explosion, while longer exposure to the
hydrogen can cause oxygen reduction in human body if the hydrogen replaces the oxygen in air.
Therefore, the detection of hydrogen leakage has become essential issue in many industries. In
detecting low concentration of hydrogen, a sensing material based on titanium dioxide (TiO2)
nanoparticles has been proposed in this study. A glass powder, B2O3 also was added into TiO2 to
obtain good adhesion of sensing film onto an alumina substrate. The TiO2-B2O3 paste was prepared by
mixing the sensing material with the organic binder. The organic binder used in this study was
prepared using linseed oil, m- xylene and α-terpineol. The TiO2-B2O3 gas sensor was developed
using screen- printing technology to obtain porosity structures on the surface of the sensing film
of a gas sensor, thus adsorption of the target gas will be increased and sensitivity of the gas
sensor can be improved. Multi-walled carbon nanotube (MWCNT) and graphene nanoflakes with
different ratios were added into TiO2-B2O3 paste to enhance the conductivity of the gas
sensor and to investigate the characteristics of the gas sensor, in term of sensitivity, response
time, recovery time, optimum operating temperature and repeatability and stability properties of
gas sensor to the hydrogen. The fabricated gas sensor was exposed to 100 – 1000 ppm of
hydrogen and tested at different operating temperature (28°C, 50°C, 100°C, 150°C, 200°C
and 250°C). Based on the TGA analysis, the optimum annealing temperature for the sensing film was
achieved at 500°C with annealing time in 30 minutes under ambient air. The crystallinity of
the sensing film after annealing treatment has been verified using EDX and XRD. Results showed
the optimum operating temperature for the TiO2-B2O3 gas sensor was occurred at 200°C.
Additional of MWCNT into TiO2-B2O3 has reduced the operating temperature from 150°C to 100°C,
while addition of graphene nanoflakes has improved the sensitivity of TiO2-B2O3 gas sensor
to hydrogen. This study suggests that TiO2- G1-B2O3 gas sensor as a better gas sensor for 100 –
700 ppm of hydrogen, while TiO2-MWCNT5-B2O3 gas sensor as a better gas sensor for concentration
above of 1000 ppm of hydrogen. Overall, TiO2-MWCNT5-B2O3 gas sensor is chosen as
a promising material for gas sensor in detecting 100 – 1000 ppm of hydrogen at
operating temperature of 100°C. The highest sensitivity values for TiO2-MWCNT5-
B2O3 gas sensor was achieved at operating temperature of 250°C with sensitivity
values are 6.97, 33.61, 67.64, 102.23 and 159.07 for 100 ppm, 300 ppm, 500 ppm,
700 ppm and 1000 ppm of hydrogen, respectively. |
---|