On the fabrication of aluminum doped silica preform using MCVD and solution doping technique

This paper provides detailed discussions on the fabrication of aluminum doped silica preform using solution doping technique and modified chemical vapor deposition (MCVD). The porous core layer was deposited at 1750°C with 30cm in deposition length. The soot formed at the inlet and outlet segment of...

全面介紹

Saved in:
書目詳細資料
Main Authors: Aljamimi, Salah Mohammed, Mat Sharif, Khairul Anuar, Muhamad Yassin, Shahrin Zen, Zulkifli, Mohd Imran, Tamchek, Nizam, Yusoff, Zulfadzli, Abdul Rashid, Hairul Azhar
格式: Conference or Workshop Item
語言:English
出版: IEEE 2012
在線閱讀:http://psasir.upm.edu.my/id/eprint/69505/1/On%20the%20fabrication%20of%20aluminum%20doped%20silica%20preform%20using%20MCVD%20and%20solution%20doping%20technique.pdf
http://psasir.upm.edu.my/id/eprint/69505/
標簽: 添加標簽
沒有標簽, 成為第一個標記此記錄!
實物特徵
總結:This paper provides detailed discussions on the fabrication of aluminum doped silica preform using solution doping technique and modified chemical vapor deposition (MCVD). The porous core layer was deposited at 1750°C with 30cm in deposition length. The soot formed at the inlet and outlet segment of the deposited length is analyzed using SEM for soot size and BET for pore size distribution. Refractive index profile of the doped preform is measured using preform analyzer. The refractive index difference obtained at the outlet and inlet segments shows uniform distribution of Al2O3, in agreement with the pore size distribution.