Characterization Of Fretting Fatigue of 7075-T6 Aluminium Alloy
The main aim of the research work is to present theoretical and experimental approaches to the problem of fretting fatigue using 7075-T6 aluminum alloy as a specimen and En24 steel as a pad. A literature review is carried out to explain the contact mechanics of complete contact configuration for...
Saved in:
Main Author: | |
---|---|
Format: | Thesis |
Language: | English English |
Published: |
2006
|
Subjects: | |
Online Access: | http://psasir.upm.edu.my/id/eprint/6162/1/FK_2006_85.pdf http://psasir.upm.edu.my/id/eprint/6162/ |
Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
id |
my.upm.eprints.6162 |
---|---|
record_format |
eprints |
spelling |
my.upm.eprints.61622023-10-12T02:53:42Z http://psasir.upm.edu.my/id/eprint/6162/ Characterization Of Fretting Fatigue of 7075-T6 Aluminium Alloy Jacob, M. Suresh Devanesan The main aim of the research work is to present theoretical and experimental approaches to the problem of fretting fatigue using 7075-T6 aluminum alloy as a specimen and En24 steel as a pad. A literature review is carried out to explain the contact mechanics of complete contact configuration for the fretting fatigue loading condition. The literature review includes fretting fatigue crack initiation, crack propagation and failure mechanisms and concludes with the different fretting fatigue test facilities. A novel fretting fatigue test rig has been designed to measure and control the critical parameters: normal load, frictional force and relative displacement at the contact interface using a data acquisition facility. The crack initiation and propagation data also recorded during the experiments to ascertain the crack behavior. The fretting fatigue tests have been carried for the three cyclic axial stresses 290 MPa, 300 MPa and 325 MPa with normal stress 45 MPa, 60 MPa, 90 MPa. During the experiments the frictional force, Q is measured and plotted with the number of cycles. The frictional force response increases rapidly during initial stage of experiments and attains a steady state condition approximately after 100 cycles and dwells there until the specimen fails. The frictional force versus axial load hysterias loops for different cycles are drawn which shows that the contact zone experiences partial slip regime. The Coulomb law is applied to determine the coefficient of friction which shows that higher coefficient of friction is observed for the lower normal stress and decreases gradually with an increases in normal stress. The crack propagation with dl/dN and Ak, growth curves shows that considerable retardation in crack growth is observed for the higher normal stress of 90 MPa with the three axial stresses which are caused by crack closure due to high compressive normal load. The experimental observation of fretting fatigue life results shows that increase in normal stress reduces the crack initiation cycles as well as the total life to failure for that constant axial stress. The fatigue life reduces by an average factor of 7.34, 12.46 and 17.48 respectively for the axial stress of 290 MPa with the normal stress of 45 MPa, 60 MPa and 90 MPa. The similar behaviour is observed for the other combinations fretting fatigue loading condition. A theoretical model is developed using the asymptotic analysis to study the equivalence of stress state at the pad edge for the complete contact of dissimilar materials with Dundurs parameters a,p and at the root of the notch based on the order of stress singularity, (A-1). The strain energy density criterion is applied to predict the crack initiation angle using the order of stress singularity, (A-1). The crack initiation angle compares well with the experimental angle values, which is obtained through the scanning electron microscope. A fretting fatigue life prediction model is developed based on the strain energy density criterion in which a critical process zone size is used to estimate crack initiation life and crack analogue model is used to determine the crack propagation life. The critical process zone size is estimated using the notch analogy for the fretting fatigue loading condition. The theoretically calculated crack initiation and propagation lives compares well with the experimental results. 2006-10 Thesis NonPeerReviewed text en http://psasir.upm.edu.my/id/eprint/6162/1/FK_2006_85.pdf Jacob, M. Suresh Devanesan (2006) Characterization Of Fretting Fatigue of 7075-T6 Aluminium Alloy. Doctoral thesis, Universiti Putra Malaysia. Alluminium alloys - Fatigue - Case studies English |
institution |
Universiti Putra Malaysia |
building |
UPM Library |
collection |
Institutional Repository |
continent |
Asia |
country |
Malaysia |
content_provider |
Universiti Putra Malaysia |
content_source |
UPM Institutional Repository |
url_provider |
http://psasir.upm.edu.my/ |
language |
English English |
topic |
Alluminium alloys - Fatigue - Case studies |
spellingShingle |
Alluminium alloys - Fatigue - Case studies Jacob, M. Suresh Devanesan Characterization Of Fretting Fatigue of 7075-T6 Aluminium Alloy |
description |
The main aim of the research work is to present theoretical and experimental
approaches to the problem of fretting fatigue using 7075-T6 aluminum alloy as a
specimen and En24 steel as a pad. A literature review is carried out to explain the
contact mechanics of complete contact configuration for the fretting fatigue loading
condition. The literature review includes fretting fatigue crack initiation, crack
propagation and failure mechanisms and concludes with the different fretting fatigue
test facilities. A novel fretting fatigue test rig has been designed to measure and control
the critical parameters: normal load, frictional force and relative displacement at the
contact interface using a data acquisition facility. The crack initiation and propagation
data also recorded during the experiments to ascertain the crack behavior.
The fretting fatigue tests have been carried for the three cyclic axial stresses 290 MPa,
300 MPa and 325 MPa with normal stress 45 MPa, 60 MPa, 90 MPa. During the experiments the frictional force, Q is measured and plotted with the number of cycles.
The frictional force response increases rapidly during initial stage of experiments and
attains a steady state condition approximately after 100 cycles and dwells there until the
specimen fails. The frictional force versus axial load hysterias loops for different cycles
are drawn which shows that the contact zone experiences partial slip regime. The
Coulomb law is applied to determine the coefficient of friction which shows that higher
coefficient of friction is observed for the lower normal stress and decreases gradually
with an increases in normal stress. The crack propagation with dl/dN and Ak, growth
curves shows that considerable retardation in crack growth is observed for the higher
normal stress of 90 MPa with the three axial stresses which are caused by crack closure
due to high compressive normal load. The experimental observation of fretting fatigue
life results shows that increase in normal stress reduces the crack initiation cycles as
well as the total life to failure for that constant axial stress. The fatigue life reduces by
an average factor of 7.34, 12.46 and 17.48 respectively for the axial stress of 290 MPa
with the normal stress of 45 MPa, 60 MPa and 90 MPa. The similar behaviour is
observed for the other combinations fretting fatigue loading condition.
A theoretical model is developed using the asymptotic analysis to study the equivalence
of stress state at the pad edge for the complete contact of dissimilar materials with
Dundurs parameters a,p and at the root of the notch based on the order of stress
singularity, (A-1). The strain energy density criterion is applied to predict the crack
initiation angle using the order of stress singularity, (A-1). The crack initiation angle
compares well with the experimental angle values, which is obtained through the scanning electron microscope. A fretting fatigue life prediction model is developed
based on the strain energy density criterion in which a critical process zone size is used
to estimate crack initiation life and crack analogue model is used to determine the crack
propagation life. The critical process zone size is estimated using the notch analogy for
the fretting fatigue loading condition. The theoretically calculated crack initiation and
propagation lives compares well with the experimental results. |
format |
Thesis |
author |
Jacob, M. Suresh Devanesan |
author_facet |
Jacob, M. Suresh Devanesan |
author_sort |
Jacob, M. Suresh Devanesan |
title |
Characterization Of Fretting Fatigue of 7075-T6 Aluminium Alloy |
title_short |
Characterization Of Fretting Fatigue of 7075-T6 Aluminium Alloy |
title_full |
Characterization Of Fretting Fatigue of 7075-T6 Aluminium Alloy |
title_fullStr |
Characterization Of Fretting Fatigue of 7075-T6 Aluminium Alloy |
title_full_unstemmed |
Characterization Of Fretting Fatigue of 7075-T6 Aluminium Alloy |
title_sort |
characterization of fretting fatigue of 7075-t6 aluminium alloy |
publishDate |
2006 |
url |
http://psasir.upm.edu.my/id/eprint/6162/1/FK_2006_85.pdf http://psasir.upm.edu.my/id/eprint/6162/ |
_version_ |
1781706606520565760 |
score |
13.18916 |