DMTA studies of the effect of storage time on the curing process of sheet moulding compound
The application of the dynamic mechanical thermal analysis (DMTA) test method in the study of the effect of storage time on the curing process of sheet moulding compound (SMC) is discussed. Emphasis is placed on following the curing by the study of storage modulus and loss tangent with storage time....
Saved in:
| Main Authors: | , , |
|---|---|
| Format: | Article |
| Language: | English |
| Published: |
IOP Publishing
1998
|
| Online Access: | http://psasir.upm.edu.my/id/eprint/51152/1/51152.pdf http://psasir.upm.edu.my/id/eprint/51152/ http://journals.sagepub.com/doi/abs/10.1088/0954-0083/10/4/001 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Summary: | The application of the dynamic mechanical thermal analysis (DMTA) test method in the study of the effect of storage time on the curing process of sheet moulding compound (SMC) is discussed. Emphasis is placed on following the curing by the study of storage modulus and loss tangent with storage time. Changes in the storage time showed an increase in the storage modulus (log E′) during a room-temperature cure. The loss tangent (tan δ) damping peak occurs as the system is driven into the glassy state by the cross-linking reaction. The SMC displayed a room-temperature log E′ of 8.5 Pa which increased to approximately 9 Pa in the subsequent scan in the DMTA. |
|---|