A Simplified Method of Calculating Propeller Parameters for Small Trawlers

• Main Authors: Husin, Juhari, Shahardin, Zainal Ashirin
• Format: Article
• Language: English; English
• Published: 1984
• Online Access: http://psasir.upm.edu.my/id/eprint/2230/1/A_Simplified_Method_of_Calculating_Propeller.pdf; http://psasir.upm.edu.my/id/eprint/2230/

It is quite common to encounter a propeller installed on a trawl that does not develop adaquate thrust to pull the trawl at a specified trawling speed. The immediate actions usually taken are to reduce the size of a trawl, change to a new propeller or install a higher powered engine. All these alternatives will impose a financial strain on the fishermen. Therefore, a simple method of calculation is being suggested to obtain a spectrum of propeller parameters such as diameter, pitch- diameter ratio, speed, quasipropulsive coefficient and propeller performance coefficient for a given engine model. The best combination of parameters can be obtained in order to satisfy a specific trawling requirement. Usually the requirement is stated in the form of thrust of propeller to overcome total gear drag at a specific trawling speed. Total gear drag can be determined by a model test or mathematical modelling. Three engine models have been studied and for each model values of thrusts, propeller performance coefficients and quasi- propulsive coefficient were calculated. Having known the values of torque coefficient (J.l) and advance coefficient (¢) the values of pitch- diameter ratios were obtained from propeller performance curve.