The effect of heat treatment on hardness properties and microstructure of 9Cr-Mo-V T91 alloy steel
The effect of heat treatment on hardness properties and microstructure of 9Cr-Mo-V T91 alloy steel have been investigated. In this study, T91 alloy steel were austenitized at 1050 °C for 40 minutes and then quenched in different media such as forced air, air at room temperature, sand and...
Saved in:
Main Authors: | Jaafar, Che Nor Aiza, Saleh, Mat Husin, Noraslan, Nurul Zawanah, Zainol, Ismail, Md Rezali, Khairil Anas, Anene, Franklin, Dele-Afolabi, Temitope Theophilus |
---|---|
Format: | Article |
Published: |
Universiti Putra Malaysia
2022
|
Online Access: | http://psasir.upm.edu.my/id/eprint/103508/ https://malaysianjournalofmicroscopy.org/ojs/index.php/mjm/article/view/671/358 |
Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
Similar Items
-
Intermetallics evolution and shear strength of carbon nanotubes- reinforced sn-5sb solder on copper board
by: Dele-Afolabi, Temitope Theophilus
Published: (2015) -
Experimental and numerical investigation of plain and Ni-reinforced porous alumina ceramics composites produced with agro-waste pore formers
by: Theophilus, Dele-Afolabi Temitope
Published: (2018) -
Evaluation on the hardness and microstructures of T91 reheater tubes after post-weld heat treatment
by: Maliki, Ibrahim, et al.
Published: (2016) -
Evaluation on the hardness and microstructures of T91 reheater tubes after post-weld heat treatment
by: Hamzah M.Z., et al.
Published: (2023) -
Effect of cooling rate on the microstructures and hardness of FeNiCr superalloy
by: Ridhwan, J., et al.
Published: (2013)