Torque and cutting force prediction model by using response surface method
This paper describes the development of a response models (cutting force, and torque) for milling 618 stainless steel utilizing response surface methods. The both models are developed in terms of cutting speed, feed rate, axial depth and radial depth. The cutting force and torque contours have been...
Saved in:
| Main Authors: | , |
|---|---|
| Other Authors: | |
| Format: | Article |
| Published: |
2023
|
| Subjects: | |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Summary: | This paper describes the development of a response models (cutting force, and torque) for milling 618 stainless steel utilizing response surface methods. The both models are developed in terms of cutting speed, feed rate, axial depth and radial depth. The cutting force and torque contours have been generated from these model equations and are shown of different plots. The model generated show that the cutting force reach the maximum value when cutting speed decreased and , feed rate, axial depth and radial depth are increased. The torque reaches the maximum value when cutting speed decreased and, feed rate, axial depth and radial depth are increased. The plot which shows the relationship between the torque and cutting speed been developed. From the plot, the cutting forces reach the highest value when the torque increased .The second order is more accurate based on the variance analysis and the predicted value is closer with the experimental result. � 2006, IJAMAS, CESER. |
|---|