Computational Fluid Dynamics (CFD) investigation on associated effect of classifier blades lengths and opening angles on coal classification efficiency in coal pulverizer
In order to achieve complete combustion of fuel in common thermal power plant, the process of coal fuel classification is crucial, which often governs by classifier in pulverizer. This is because smaller size of coal particle has higher surface area, and therefore able to produce higher combustion e...
Saved in:
| Main Authors: | , , , |
|---|---|
| Other Authors: | |
| Format: | Article |
| Published: |
Elsevier Ltd
2023
|
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Summary: | In order to achieve complete combustion of fuel in common thermal power plant, the process of coal fuel classification is crucial, which often governs by classifier in pulverizer. This is because smaller size of coal particle has higher surface area, and therefore able to produce higher combustion efficiency. This paper describes the Computational Fluid Dynamics (CFD) simulations of coal pulverizer were done for classifier with different blade length and at different opening angle. The objective of the work is to evaluate optimum classifier design with the highest coal fineness output and separation efficiencies. Preliminary work of validating simulation result with experimental result of classifier with initial geometry was done, and good agreement was obtained. Grade efficiencies and sharpness of cut of each different classifier model were determined by plotting of Tromp curves. Simulation studies showed that classifier blade length of 313.94 mm at 40� was found to be optimum, with 71.5% of particles passing fine size sieve (75 ?m) and 0.1852 sharpness of cut. Classification of fine coal by the optimum classifier model is improved by 10%, as compared to original classifier model used in industry. � 2022 The Author(s) |
|---|