Characterization of manganese doped Y-TZP for biomedical applications

The densification behaviour and mechanical properties of manganese oxide doped yttria tetragonal zirconia polycrystals (MnO2-doped Y-TZP) were studied. Green samples containing varying amounts of MnO2 (0.05 to 1 wt%) were prepared using the wet colloidal technique. A pressure less sintering techniqu...

詳細記述

保存先:
書誌詳細
主要な著者: Meenaloshini S., Sing Y.W., Mohsen G., Dinesh R.
その他の著者: 48561725600
フォーマット: 論文
出版事項: Universiti Malaysia Perlis 2023
タグ: タグ追加
タグなし, このレコードへの初めてのタグを付けませんか!
その他の書誌記述
要約:The densification behaviour and mechanical properties of manganese oxide doped yttria tetragonal zirconia polycrystals (MnO2-doped Y-TZP) were studied. Green samples containing varying amounts of MnO2 (0.05 to 1 wt%) were prepared using the wet colloidal technique. A pressure less sintering technique was used to sinter the specimens at temperatures varying between 1150�C to 1600�C. Sintered bodies were characterized to determine the bulk density, tetragonal content, Young�s Modulus, hardness and fracture toughness. The results showed that the sintered bulk density and Young�s Modulus was enhanced by the addition of up to 0.1 wt% MnO2. On the other hand, fracture toughness of the material was further improved and more prominent for dopant addition of up to 0.3 wt% but for the 0.5 wt% addition of MnO2, an initial decrease in trend was observed, which after a sintering temperature of 1350�C, a drastic increase in properties was observed. As for the hardness of the material, addition of all wt% of dopant exhibited an improvement up to a sintering temperature of 1400�C. In addition to that, hydrothermal ageing - induced phase transformation of Y-TZP sintered at 1300�C for samples containing 0.5 and 1.0 wt% of MnO2 was suppressed. � 2015, Universiti Malaysia Perlis. All rights reserved.