Effect of Copper Oxide and Manganese Oxide on Properties and Low Temperature Degradation of Sintered Y-TZP Ceramic
The effect of copper oxide (CuO) and manganese oxide (MnO2) co-dopant on the densification behavior of 3 mol% yttria-stabilized zirconia was investigated. Green samples were prepared and sintered in air at temperatures ranging from 1250 to 1500 °C with a short holding time of 12 min. Sintered bodies...
Saved in:
| Main Authors: | , , , , , , , |
|---|---|
| Other Authors: | |
| Format: | Article |
| Published: |
Springer Science and Business Media, LLC
2023
|
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Summary: | The effect of copper oxide (CuO) and manganese oxide (MnO2) co-dopant on the densification behavior of 3 mol% yttria-stabilized zirconia was investigated. Green samples were prepared and sintered in air at temperatures ranging from 1250 to 1500 °C with a short holding time of 12 min. Sintered bodies were characterized to determine the phase stability, bulk density, hardness, fracture toughness, Young’s modulus and grain size. In addition, the aging-induced tetragonal to monoclinic phase transformation of the sintered zirconia was evaluated. It was revealed that the addition of CuO-MnO2 co-dopant was beneficial in enhancing the densification and mechanical properties of the ceramic particularly at low temperatures. A high fracture toughness of 5.5 MPam1/2 coupled with high hardness of 14.5 GPa was obtained for co-doped samples sintered at 1350 °C. However, the undoped ceramic exhibited better properties when sintered above 1350 °C. The study also found that the dopants did not prevent grain coarsening and hence did not suppress the aging-induced phase transformation particularly for samples sintered above 1350 °C. © 2014, ASM International. |
|---|