Sintering studies of synthesised manganeseoxide- doped calcium phosphate via wet chemical precipitation method
The beneficial effects of incorporating small amounts of manganese oxide, MnO2 (005, 01, 03, 05 and 10 wt%) into biphasic calcium phosphate in promoting sintering and its effect on physical and mechanical properties of the dense sample sintered at 1000-1400°C were investigated. In this work, a wet p...
Saved in:
| Main Authors: | , , , , , |
|---|---|
| Other Authors: | |
| Format: | Article |
| Published: |
Maney Publishing
2023
|
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Summary: | The beneficial effects of incorporating small amounts of manganese oxide, MnO2 (005, 01, 03, 05 and 10 wt%) into biphasic calcium phosphate in promoting sintering and its effect on physical and mechanical properties of the dense sample sintered at 1000-1400°C were investigated. In this work, a wet precipitation method was employed to prepare biphasic calcium phosphate powder. The starting materials of calcium hydroxide and orthophosphoric acid were used in the titration process and the as-synthesised powder was subsequently doped with manganese oxide by wet milling. The X-ray diffraction analysis revealed that the phase present in the as-synthesised powder was predominantly hydroxyapatite. However, upon sintering, all the samples revealed the existence of biphasic calcium phosphate i.e. a mix phase comprising of hydroxyapatite and tricalcium phosphate. The highest relative density of 995% was obtained for biphasic calcium phosphate doped with 03 wt% MnO2 when sintered at 1400°C. The results also revealed that 03 wt% MnO2-doped biphasic calcium phosphate gave a maximum Vickers hardness of 514 GPa. On the other hand, 10 wt% MnO2-doped biphasic calcium phosphate exhibited highest fracture toughness of 132 MPa m1/2 as compared to 088 MPa m1/2 for undoped biphasic calcium phosphate when sintered at 1200°C. © W. S. Maney &Son Ltd 2014. |
|---|