Cover Image

Mixed shear mode and compression mode MRE isolator

Interim sem 2020 / 2021

Saved in:

Bibliographic Details
Main Author:	Anas Najmi bin Azman
Format:
Published:	2023
Subjects:	Vibration isolator Mixed mode Transmissibility
Tags:	Add Tag No Tags, Be the first to tag this record!

Similar Items

Active engine mounting system using natural logarithm sliding mode control (ln-SMC)
by: Andika, Aji Wijaya, et al.
Published: (2009)

Mixed shear mode and compression mode magnetorheological elastomer isolator
by: Azman A.N., et al.
Published: (2023)

Evaluation of mechanical properties on Vulcanized SMRCV-60 and ENR-25 of flexible-rigid body vibration isolator
by: Mohd Azli, Salim, et al.
Published: (2020)

Prediction of basic and circular vibration isolator in high frequencies using Malaysian natural rubber for highway C2L machine
by: Mohd Azli, Salim, et al.
Published: (2022)

Small gas component detection using ultrasonic transmission-mode tomography system
by: Nor Muzakkir, Nor Ayob, et al.
Published: (2015)

Mathematical modelling of passive discrete lumped parameter system using standard malaysian rubber constant viscosity
by: Mohd Azli, Salim, et al.
Published: (2022)

$Mode I fracture resistance of hot mix asphalt and warm mix asphalt$

Mode I fracture resistance of hot mix asphalt and warm mix asphalt
by: Hasan, Ziari, et al.
Published: (2012)

Design and testing of magnetorheological fluid ( MRF) Isolator to machine vibration
by: Amirul Nasuha Bin Amirul Jefri
Published: (2023)

Investigations into interplay mechanism between inter-area and local oscillatory modes in a power system
by: Tan K.K., et al.
Published: (2023)

Optical tomography: Image improvement using mixed projection of parallel and fan beam modes
by: Siti Zarina, Mohd Muji, et al.
Published: (2014)

Isolation and Biological Activity of Naturally Occurring Compounds from Melicope Lunu Ankenda (Gaertn) T-Hartley, Melicope Bonwickii(F-Muell) Tharyley and Tetradium Sambucinum (Bl) Hartley
by: Komala, Ismiarni
Published: (2005)

Performance evaluation of an FDDI-ATM gateway by simulation method / Norini Hamdan
by: Hamdan, Norini
Published: (1995)

Cell Utilization Efficiency of Internet Protocol Traffic over Asynchronous Transfer Mode Networks
by: S., Janakiraman
Published: (1996)

Steady compression characteristics of laminated MRE isolator
by: Wahab, N. A. A., et al.
Published: (2016)

Gain Stabilization Mechanism Through Dynamic Common Mode Feedback and Gain Booster in Folded Cascode Track and Hold (T/H) Circuit
by: M. Amir Abas, A. Asyraf, et al.
Published: (2013)

Optimization of the processing mode of machine tools by using the criterion of minimum cost
by: A. M., Ahmed Alwaise, et al.
Published: (2012)

Evaluation of Weight Factor Mode and EEMD performance on measuring heart rate activity in the presence of cardiac arrhythmia
by: Mohamed, Kharrat, et al.
Published: (2012)

Measuring vibration and noise of blower based on different operation modes
by: Syaza Mawaddah, Zul Azki
Published: (2021)

A Comparative Study of Warm Mix Asphalt at Different Temperatures and Bitumen Grades
by: Mohammad Haziq bin Alias
Published: (2023)

Foreign funds back in selling mode
by: Anon
Published: (2020)

Design of VD-DDCC for novel dual mode universal filter with grounded passive components
by: Musa Ali, Albrni, et al.
Published: (2021)

The Properties of Sma 20 Prepared by Warm Mix Procedure at Different Temperature and Bitumen Grade
by: Muhammad Hasif bin Che Awang
Published: (2023)

Zinc oxide-based saturable absorber for generation of passively Q-switched and mode-locked erbium- doped fiber laser
by: Syed Husin, Syarifah Aloyah
Published: (2018)

Comparison Between Hot Mix Process And Warm Mix Process Using Stone Mastic Asphalt
by: Nurul Aina Binti Azman
Published: (2023)

Fuel mix in electricity generation, 1990-2000
by: Unit Perancang Ekonomi
Published: (2011)

Variable structure system with sliding mode controller
by: Ahmed, A. A., et al.
Published: (2013)

Variable structure system with sliding mode controller
by: Ali Amer, Ahmed, et al.
Published: (2014)

Relationship between mixing time and concrete strength
by: M. N., Ikhsan, et al.
Published: (2010)

Development of reliability-centered maintenance model using linguistic failure mode and effect analysis
by: Mohammed Ahmed Qaid, Alrifaey Moath
Published: (2019)

Influence of four wave mixing on modulation format performance under 100 Gb/s data rate
by: Haider Jabber, Abed, et al.
Published: (2013)

Design and develop a cooker and inner coat isolator for peanuts
by: Siti Nur Amirah, Abdullah
Published: (2021)

Study the natural frequency of elastomer vibration absorber with taper insertion ring
by: Atiq Bin Alwi
Published: (2023)

Mixing in the mechanically agitated bioreactor: ‘A matter of being stirred, not shaken’
by: Shaliza, Ibrahim, Prof.
Published: (2011)

Vibration analysis of a vehicles side mirror
by: Hafizullah Amin bin Che Rusli
Published: (2023)

Characterization of a diesel-degrading strain isolated from a hydrocarbon-contaminated site
by: Mohd Yunus, Shukor, et al.
Published: (2016)

Development of tungsten (VI) trioxide-based saturable absorber for mode-locked fiber laser
by: Abdul Hadi, Muhamad Amir Waliuddin
Published: (2020)

Isolation of Steroidal Saponin from Dracaena umbratical / Raudhatul Jannah Mohd Zuki et al.
by: Mohd Zuki, Raudhatul Jannah, et al.
Published: (2012)

Effect of mixing parameter on epoxy composites: mechanical and microscopy analysis
by: Ng, Soo Li
Published: (2022)

Averaged modeling of an interleaved boost converter in continuous conduction mode
by: Utomo, Wahyu Mulyo, et al.
Published: (2013)

Assessment on the use of FTA-stored DNA method for detection of random amplified polymorphic DNA (RAPD) P12 and P15 from Elaeis guineensis / Zainab Aliyu Muhammad
by: Muhammad, Zainab Aliyu
Published: (2021)