Microstructure and surface characterization of Ni-Cr based composites containing variable solid lubricants
Ni-Cr based composites with and without the addition of solid lubricants (MoS2, Ag and CaF2) were prepared by powder metallurgy method. The samples were sintered at 1200°C in flowing argon atmosphere for 1 h. The physical properties such as sintered density, relative density and porosity were studie...
Saved in:
Main Authors: | Wan Farhana, Mohamad, Amir Azam, Khan, Pierre, Barroy, Oliver, Durand-Drouhin, Clement, Puille, Abdelilah, Lahmar, Faiz, Ahmad |
---|---|
Format: | E-Article |
Published: |
Taylor & Francis Group
2020
|
Subjects: | |
Online Access: | http://ir.unimas.my/id/eprint/30029/ https://www.tandfonline.com/doi/abs/10.1080/17515831.2020.1777759?journalCode=ytrb20 |
Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
Similar Items
-
Microstructure and surface characterization of Ni-Cr based composites containing variable solid lubricants
by: Mohamad, W.F., et al.
Published: (2020) -
Microstructure and surface characterization of Ni-Cr based composites containing variable solid lubricants
by: Mohamad, W.F., et al.
Published: (2020) -
Sliding friction behavior of sintered NI-CR composites with solid lubricants
by: Wan, F.M., et al.
Published: (2021) -
Effect of cooling rate on the microstructures and hardness of fe-ni-cr superalloy
by: Ridhwan, J., et al.
Published: (2013) -
Ni-Cr based Self Lubricating Composites with the Different Solid Lubricants Produced through Powder Metallurgy Method
by: WAN FARHANA, MOHAMAD
Published: (2021)