Cover Image

Optimisation of pipe fitting in the injection moulding process using the Taguchi method

Link to publisher's homepage at https://aset.unimap.edu.my

Saved in:
Bibliographic Details
Main Author: Mohamad Fitri, Mohamad Sani
Other Authors: fitriesanie@gmail.com
Format: Article
Language:English
Published: Penerbit UniMAP (UniMAP Press) 2022
Subjects:
Injection moulding
Taguchi method
Optimisation
Simulation
Online Access:http://dspace.unimap.edu.my:80/xmlui/handle/123456789/75793
Tags: Add Tag
No Tags, Be the first to tag this record!
id my.unimap-75793
record_format dspace
spelling my.unimap-757932022-08-02T04:38:25Z Optimisation of pipe fitting in the injection moulding process using the Taguchi method Mohamad Fitri, Mohamad Sani fitriesanie@gmail.com Faculty of Mechanical Engineering Technology, Universiti Malaysia Perlis (UniMAP) Injection moulding Taguchi method Optimisation Simulation Link to publisher's homepage at https://aset.unimap.edu.my This paper presents the optimisation of the injection moulding process on a pipe fitting using the Taguchi method. This study optimises the injection moulding parameters that yield minimum sink marks and volumetric shrinkage in the injected pipe fitting. Five parameters: cooling time, melting temperature, packing time, packing pressure, and injection pressure, were considered in the simulation. Taguchi method with L27 Orthogonal array was employed to construct the Design of Experiment (DOE) for the simulation analysis. The main responses are sink marks and volumetric shrinkage. The main effect and ANOVA analysis were also studied. The results revealed that melting temperature was the most significant factor influencing sink mark response. However, packing pressure crucially affects the volumetric shrinkage of the injected pipe fitting part. The optimal injection moulding process can be achieved with a cooling time of 26.52 s, a melt temperature of 218 ℃, an injection pressure of 36.23 MPa, a packing pressure of 60 MPa and a packing time of 5 s. 2022-08-02T04:38:25Z 2022-08-02T04:38:25Z 2022-06-30 Article Advanced and Sustainable Technologies (ASET), vol.1(1), 2022, pages 26-33 http://dspace.unimap.edu.my:80/xmlui/handle/123456789/75793 https://aset.unimap.edu.my en Penerbit UniMAP (UniMAP Press)
institution Universiti Malaysia Perlis
building UniMAP Library
collection Institutional Repository
continent Asia
country Malaysia
content_provider Universiti Malaysia Perlis
content_source UniMAP Library Digital Repository
url_provider http://dspace.unimap.edu.my/
language English
topic Injection moulding
Taguchi method
Optimisation
Simulation
spellingShingle Injection moulding
Taguchi method
Optimisation
Simulation
Mohamad Fitri, Mohamad Sani
Optimisation of pipe fitting in the injection moulding process using the Taguchi method
description Link to publisher's homepage at https://aset.unimap.edu.my
author2 fitriesanie@gmail.com
author_facet fitriesanie@gmail.com
Mohamad Fitri, Mohamad Sani
format Article
author Mohamad Fitri, Mohamad Sani
author_sort Mohamad Fitri, Mohamad Sani
title Optimisation of pipe fitting in the injection moulding process using the Taguchi method
title_short Optimisation of pipe fitting in the injection moulding process using the Taguchi method
title_full Optimisation of pipe fitting in the injection moulding process using the Taguchi method
title_fullStr Optimisation of pipe fitting in the injection moulding process using the Taguchi method
title_full_unstemmed Optimisation of pipe fitting in the injection moulding process using the Taguchi method
title_sort optimisation of pipe fitting in the injection moulding process using the taguchi method
publisher Penerbit UniMAP (UniMAP Press)
publishDate 2022
url http://dspace.unimap.edu.my:80/xmlui/handle/123456789/75793
_version_ 1743108375797825536
score 13.222552

Similar Items