Cover Image

Analysis of shrinkage on the thick plate part using Response Surface Methodology (RSM)

Access is limited to UniMAP community.

Saved in:
Bibliographic Details
Main Author: Muhammad Isafiq, Mohd Disa
Format: Learning Object
Language:English
Published: Universiti Malaysia Perlis (UniMAP) 2021
Subjects:
Response Surface Methodology (RSM)
Thick plate
Injection moulding
Online Access:http://dspace.unimap.edu.my:80/xmlui/handle/123456789/69840
Tags: Add Tag
No Tags, Be the first to tag this record!
id my.unimap-69840
record_format dspace
spelling my.unimap-698402021-02-24T07:48:43Z Analysis of shrinkage on the thick plate part using Response Surface Methodology (RSM) Muhammad Isafiq, Mohd Disa Response Surface Methodology (RSM) Thick plate Injection moulding Access is limited to UniMAP community. This study is about research on the analysis of the quality (shrinkage) on the thick plate part using response surface methodology (RSM). The objective of this study is to improve the quality of thick plate part by reducing the shrinkage on the part. Previous study of injection moulding were reviewed to find the significant factor. From the review, it have found that the most influence factor that effect the moulded part is mould temperature and melt temperature. Before the real process of injection moulding is start, the simulation were done. Moldflow Analysis Insight (AMI) 2013 was used to run the simulation. The objective of this simulation is to know the suitable parameter setting of injection moulding. By using thick plate part mould design in 3D, three analysis which is fill, fill + pack and cool (FEM) analysis were conducted. From the simulation, four variable parameter were obtained, including of mould temperature, melt temperature, packing pressure and packing time. With using RSM method, both result of analysis, simulation analysis and experiment analysis were optimised. From the optimisation, it showed that packing pressure is the most significant factor that affecting the shrinkage of the moulded part. Result after optimisation for simulation analysis shown that the shrinkage has reduce 42.48% for parallel direction and 14.41% for normal direction. While for experiment, shrinkage was achievable minimise for 6.45% and 19.44% respectively for parallel and normal direction. From this study, parameter that suitable to reduce the shrinkage were obtained. 2021-02-24T07:48:43Z 2021-02-24T07:48:43Z 2016-06 Learning Object http://dspace.unimap.edu.my:80/xmlui/handle/123456789/69840 en Universiti Malaysia Perlis (UniMAP)
institution Universiti Malaysia Perlis
building UniMAP Library
collection Institutional Repository
continent Asia
country Malaysia
content_provider Universiti Malaysia Perlis
content_source UniMAP Library Digital Repository
url_provider http://dspace.unimap.edu.my/
language English
topic Response Surface Methodology (RSM)
Thick plate
Injection moulding
spellingShingle Response Surface Methodology (RSM)
Thick plate
Injection moulding
Muhammad Isafiq, Mohd Disa
Analysis of shrinkage on the thick plate part using Response Surface Methodology (RSM)
description Access is limited to UniMAP community.
format Learning Object
author Muhammad Isafiq, Mohd Disa
author_facet Muhammad Isafiq, Mohd Disa
author_sort Muhammad Isafiq, Mohd Disa
title Analysis of shrinkage on the thick plate part using Response Surface Methodology (RSM)
title_short Analysis of shrinkage on the thick plate part using Response Surface Methodology (RSM)
title_full Analysis of shrinkage on the thick plate part using Response Surface Methodology (RSM)
title_fullStr Analysis of shrinkage on the thick plate part using Response Surface Methodology (RSM)
title_full_unstemmed Analysis of shrinkage on the thick plate part using Response Surface Methodology (RSM)
title_sort analysis of shrinkage on the thick plate part using response surface methodology (rsm)
publisher Universiti Malaysia Perlis (UniMAP)
publishDate 2021
url http://dspace.unimap.edu.my:80/xmlui/handle/123456789/69840
_version_ 1698698280735604736
score 13.214268

Similar Items