Interactive calculation and verification of balanced fault currents

• 主要作者: Khor Wei Wei
• 其他作者: Samila Mat Zali (Advisor)
• 格式: Learning Object
• 语言: English
• 出版: Universiti Malaysia Perlis 2009
• 主题: Short circuits; Electric power distribution; Electric power systems > Mathematical models; System analysis; Vector analysis
• 在线阅读: http://dspace.unimap.edu.my/xmlui/handle/123456789/3836

In this paper a balanced short circuit analysis is performed on a simple power system using two recognized international standards (ANSI/IEEE C37.010.1979 and IEC 909 Standards). The ANSI standards performed using impedance-based calculations. It currently applies to equipment rating values include C37.010 for systems 1000 V and above. The IEC 909 Standard (1988) is derivative work taken from German Verband Deutscher Electrotechniker (VDE) Standard. This standard current-based calculation applies to all voltages up to 230 kV operating at nominal frequency (50 or 60 Hz). Both the ANSI and the IEC standards for short-circuit currents calculation procedures were developed to provide conservative results. For verification, comparisons are made between the values calculated with the IEC and appropriate ANSI/IEEE Standards.