Cover Image

The effects of multiple zincation process on Aluminum Bond Pad surface for Electroless Nickel Immersion Gold deposition

Fulltext article is acessible via ASME Online (http://www.asme.org) or connect to A-Z Listing at http://mylib.unimap.edu.my/

Saved in:

Bibliographic Details
Main Authors:	Mohd Khairuddin, Md Arshad, Ibrahim, Ahmad, Azman, Jalar, Ghazali, Omar, Uda, Hashim
Format:	Article
Language:	English
Published:	American Society of Mechanical Engineers (ASME) 2008
Subjects:	Zincation Electroless nickel immersion gold (ENIG) Under bump metallurgy (UBM) Aluminum Zinc oxide
Online Access:	http://dspace.unimap.edu.my/xmlui/handle/123456789/3505
Tags:	Add Tag No Tags, Be the first to tag this record!

Similar Items

The characterization of Al Bond pad surface treatment in Electroless Nickel Immersion Gold (ENIG) deposition
by: Mohd Khairuddin, Md Arshad, et al.
Published: (2008)

The surface characteristics of under bump metallurgy (UBM) in electroless nickel immersion gold (ENIG) deposition
by: Mohd Khairuddin, Md Arshad, et al.
Published: (2008)

The effect of temperature, pH and exposure time to Electroless Nickel Deposition for Under Bump Metallurgy (UBM)
by: Mohd Khairuddin, Md Arshad, et al.
Published: (2009)

The surface morphology characterization of electroless nickel immersion gold under bump metallurgy (UBM) using SEM
by: Mohd Khairuddin, Md Arshad, et al.
Published: (2009)

Characterization of parasitic residual deposition on passivation layer in electronics nickel immersion gold process
by: Mohd Khairuddin, Md Arshad, et al.
Published: (2008)

Characterization of Electroless Under Bump Metallurgy for Alsi Bond Pad Composition
by: Norahmad Barzrul Basaruddin
Published: (2008)

Relationship between controllable process parameters on bump height in ENIG
by: Zaliman, Sauli, Dr., et al.
Published: (2014)

Bump height at low temperature analysis
by: Zaliman, Sauli, Dr., et al.
Published: (2014)

Development of dense hydroxyapatite-ni by modified electroless deposition technique.
by: Sri Asliza, Md Amin, et al.
Published: (2014)

The effects of zincation process on aluminum bond pad surfaces for Electroless Nickel Immersion Gold (ENIG) deposition
by: Md Arshad, M.K., et al.
Published: (2017)

The effects of multiple zincation process on aluminum bond pad surface for electroless nickel immersion gold deposition
by: Md Arshad, M.K., et al.
Published: (2017)

Effect of different nickel content on the mechanical properties of hydroxyapatite-ni composites from coated powders
by: Sri Asliza, Md Amin, et al.
Published: (2014)

The study of mechanical and thermoelectric properties of nickel zinc ferrite
by: Noor Amalina, Mat Zin
Published: (2017)

Wafer bumping: A comparative technologies study
by: Mohd Khairuddin, Md Arshad
Published: (2010)

Electroless Ni-P-Cg(Graphite)-SiC composite coating on cast AlSi alloy
by: Mukridz, Md Mohtar, Engr., et al.
Published: (2014)

Characterization of intermetallic growth of gold ball bonds on aluminum bond pads
by: Mohd Khairuddin, Md Arshad, et al.
Published: (2009)

Chemical Precipitation Of Electroless Nickel Real Spent Rinse Wastewater Treatment
by: Farea Abdulrahman Mohammed
Published: (2023)

Optical and Structural Properties of ZnO:Au Nanocomposite Thin films
by: Farah, T. M. Noori, et al.
Published: (2018)

Interfacial analysis of carbon nanotubes-reinforced and graphene-reinforced Sn-1.0Ag-0.5Cu solder on electroless nickel/ immersion silver surface finish
by: Krishna, Vidyatharran
Published: (2020)

Fabrication of nanostructured anodized aluminum oxide (AAO) on Si-Al substrate for electronic applications
by: Nur Hafiza, Mohd Najib
Published: (2014)

Preparations of effect of heat treatment on the isothermal oxidation of Fe-33Ni-19Cr
by: Siti Aisyah, Che Sakdun
Published: (2022)

Surface roughness and adhesion analysis study on ultrasonic gold ball onto aluminium bond pad
by: Vithyacharan, Retnasamy
Published: (2014)

Preparation and characterization of Co-HA powder using modified electroless method
by: Mohd Zaheruddin, Kasmuin, et al.
Published: (2014)

Influences of Phosphoric acid (H3PO4) solution on formation of Porous Anodic Aluminum Oxide (AAO) thin film
by: Norul Fatihah Abdul Hadi
Published: (2009)

The effect of number of zincation in Electroless Nickel Immersion Gold (ENIG) Under Bump Metallurgy (UBM) on reliability in microelectronics packaging
by: Abdullah, S.H., et al.
Published: (2017)

Physical and optical properties of zinc oxide micro and nanostructures deposited on various substrates
by: Kamalianfar, Ahmad
Published: (2014)

Structural, optical and antibacterial properties of zinc oxide nanoparticles synthesized via chemical and green synthesis methods
by: Ribut, Siti Huzaimah
Published: (2019)

Preparation and characterization of zinc oxide nanoparticles
by: Baharudin, Khairul Basyar
Published: (2011)

Biosynthesis of zinc oxide nanoparticles by Pichia kudriavzevii GY1 and their biomedical properties
by: Amin, Boroumandmoghaddam
Published: (2018)

Synthesis and characterization of biogenic zinc oxide nanoparticles photocatalysts and evaluation of its antioxidant, antibacterial and nanotoxicity properties
by: Lau, Gee Een
Published: (2021)

The effect of Strontium on the Magnesium sacrificial anode by planned interval immersion
by: Najib Saedi, Ibrahim, et al.
Published: (2013)

Synthesis and characterisation of copper oxide doped zinc oxide nanophotocatalyst and its photocatalytic ability in methyl orange dye degradation
by: Razali, Norzafirah
Published: (2011)

Electrochemical anodization of aluminum at room temperature by electronically controlled direct current circuit
by: Alaba Oladeji, Araoyinbo
Published: (2016)

Sintering effects on mechanical properties of Co-HA composite prepared by modified electroless deposition.
by: Mohd Zaheruddin, Kasmuin, et al.
Published: (2014)

Synthesis and characterization of electroless copper coated SiC particles
by: Azmi, Kamardin, et al.
Published: (2014)

The KNO3- and K2Co3-Induced hot corrosion behaviour of M-21 alloy at 900°C
by: Mohammed Misbahul, Amin, et al.
Published: (2009)

Influence of Nitric acid and RE-OA-H3PO4 acid solution on formation of porous anodic aluminium oxide (AAO) thin film
by: Juyana A. Wahab
Published: (2008)

Study of zinc oxide films on SiO2/Si substrate by sol-gel spin coating method for pH measurement
by: Foo, Kai Loong, et al.
Published: (2014)

The characterization of Al bond pad surface treatment in electroless nickel immersion gold (ENIG) deposition
by: Md Arshad, M.K., et al.
Published: (2017)

Characterization of Intermetallic Growth in Gold Ballbonds on Aluminum Metallization
by: Lim Moy Fung
Published: (2008)