封面圖片

Experimental study of machinability of GFRP composites by end milling

Link to publisher's homepage at http://www.tandfonline.com/

Saved in:

書目詳細資料
Main Authors:	Azwan Iskandar, Azmi, Lin, Richard J.T., Bhattacharyya, Debes
格式:	Article
語言:	English
出版:	Taylor and Francis Group, LLC. 2012
主題:	End milling Glass fiber reinforced polymer (GFRP) composites Machining Tool life Tool wear
在線閱讀:	http://dspace.unimap.edu.my/xmlui/handle/123456789/21277
標簽:	添加標簽沒有標簽, 成為第一個標記此記錄!

相似書籍

Fuzzy logic predictive model of tool wear in end milling glass fibre reinforced polymer composites
由: Azwan Iskandar, Azmi, et al.
出版: (2012)

Tool wear prediction models during end milling of glass fibre-reinforced polymer composites
由: Azwan Iskandar, Azmi, et al.
出版: (2013)

Parametric study of end milling glass fibre reinforced composites
由: Azwan Iskandar, Azmi, et al.
出版: (2012)

Machinability study of glass fibre-reinforced polymer composites during end milling
由: Azwan Iskandar, Azmi, et al.
出版: (2013)

Machinability study of glass fibre-reinforced polymer composites during end milling
由: Azwan Iskandar, Azmi, et al.
出版: (2013)

Design of multi-purpose carbide end mill
由: Ku, Harry, Dr., et al.
出版: (2011)

NUMERICAL MODELLING OF GLASS FIBER REINFORCED POLYMER (GFRP) CROSSARM IN TRANSMISSION TOWER SUBJECTED TO STATIC LOADING
由: Afiqah Nadhirah Rosli
出版: (2023)

High-speed photographic study of chip formation during end milling of GFRP composites
由: Azwan Iskandar, Azmi, et al.
出版: (2014)

Design of fuzzy logic model for the prediction of tool performance during machining of composite materials
由: Azwan Iskandar, Azmi
出版: (2017)

Chip formation studies in machining fibre reinforced polymer composites
由: Azwan Iskandar, Azmi, Dr.
出版: (2014)

Effect of tool holder geometry and cutting condition when milling nickel-based alloy 242
由: Habeeb H.H., et al.
出版: (2023)

Multi-objective optimisation of machining fibre reinforced composites
由: Azwan Iskandar, Azmi
出版: (2017)

Dissociation artificial neural network for tool wear estimation in CNC milling
由: Wong S.Y., et al.
出版: (2024)

Machining performance of reinforced alumina insert in end milling of AISI 1018 steel
由: Mohd Nor Hakim, Hassan, et al.
出版: (2014)

High-speed end-milling of AISI 304 stainless steels using new geometrically developed carbide inserts
由: Abou-El-Hossein K.A., et al.
出版: (2023)

Flexural Behavior and Failure Modes of Pultruded GFRP Tube Concrete-Filled Composite Beams: A Review of Experimental and Numerical Studies
由: Al-Ezzi M.J., et al.
出版: (2025)

Web crippling performance of pultruded GFRP C sections strengthened by fibre-reinforced epoxy composite
由: Lakhiar M.T., et al.
出版: (2024)

Performance of carbide cutting tools when machining of nickel based alloy
由: Noor M.M., et al.
出版: (2023)

Influences of main machining process parameters and tool wear on the machining damage generated during edge milling CFRP composites / Nguyen Thi-Hue and Nguyen Dinh-Ngoc
由: Nguyen, Thi-Hue, et al.
出版: (2023)

Recent Advances of GFRP Composite Cross Arms in Energy Transmission Tower: A Short Review on Design Improvements and Mechanical Properties
由: Syamsir A., et al.
出版: (2024)

Natural Fiber Filament Wound Composites: A Review
由: Suriyati, Mohamed Ansari, et al.
出版: (2020)

Machining of nickel based alloys using different cemented carbide tools
由: Khidhir B.A., et al.
出版: (2023)

A Mathematical Model of Flexural-Creep Behaviour for Future Service Expectancy of a GFRP Composite Cross-Arm with the Influence of Outdoor Temperature
由: Alhayek A., et al.
出版: (2024)

Investigation on the effects of machining performances for milling Al-30%/SiC-70% infiltrate metal matrix composites
由: R., Izamshah, et al.
出版: (2022)

Aspects of wear mechanisms of carbide tools when machine Hastelloy C-22HS
由: Kadirgama K., et al.
出版: (2023)

Effect of Machining Parameters on Delamination During Milled Banana Fiber Reinforced Polyester Composites
由: Mohd Zurayyen Abdul Mutalib, Zailan Karim, et al.
出版: (2013)

Effect of Dry Machining on Tool Wear During Turning Al 6061 by Using Different Type of PVD and CVD Coated Carbide Inserts
由: Syed Azuan Syed Ahmad, et al.
出版: (2014)

Crushing behaviour of glass fibre/epoxy composite pipes: the effects of winding angles, ageing, and temperatures
由: Nurul Fitriah, Suhaimi
出版: (2016)

Tool life and wear mechanism when machining Hastelloy C-22HS
由: Kadirgama K., et al.
出版: (2023)

A Study on Tool Wear and Surface Finish by Applying Positive and Negative Rake Angle during Machining
由: Zailan Abdul Karim, et al.
出版: (2014)

Lifespan prediction of glass fiber reinforced polymers subjected to flexural creep and elevated temperatures using analytical and numerical analyses
由: Alhayek A., et al.
出版: (2025)

A study on fiber glass composite hovercraft hull with different wall thickness using finite element analysis
由: Muhammad Aiman, Ahmad Fozi
出版: (2016)

Damage detection and characterization in C-glass and E-glass fibre-reinforced polymer due to low and high velocity impact events
由: Safri, Syafiqah Nur Azrie
出版: (2014)

Development of thermostable microencapsulated lactobacillus targeted gut delivery / Muhamad Fareez Ismail
由: Ismail, Muhamad Fareez
出版: (2018)

A study of design new method cutting metal plate lead / Abdull Hadi Salleh.
由: Salleh, Abdull Hadi
出版: (2009)

Alat pengupas kelapa / Affandi Rumpa and Dayang Fatimah Abang Shebli
由: Rumpa, Affandi, et al.
出版: (1996)

Investigation of jolt squeeze machine specifications for dumbell design production and its characterizations / Muhammad Danish Haikal Hamzah
由: Hamzah, Muhammad Danish Haikal
出版: (2024)

Mechanical properties of sugar palm fibre-reinforced epoxy composites
由: Leman, Zulkiflle
出版: (2009)

Three dimensional cutting force and tool deflection in micro-end milling AISI D2 / Noor Aniza Norrdin
由: Norrdin, Noor Aniza
出版: (2016)

The Reduction Factor of Pultrude Glass Fibre-Reinforced Polyester Composite Cross-Arm: A Comparative Study on Mathematical Modelling for Life-Span Prediction
由: Abu Bakar M.S., et al.
出版: (2024)