Honeycomb ribs design on overcoming part warping
Thin walled plastic parts are subjected to warpage after injection. Warpage can be overcome by designing ribs. This experimental project is to design a suitable honeycomb ribs replacing the normal ribs to overcome part warping. The parameters included honeycomb ribs height, honeycomb ribs thickness...
Saved in:
| Main Author: | |
|---|---|
| Format: | Undergraduates Project Papers |
| Language: | English |
| Published: |
2012
|
| Subjects: | |
| Online Access: | http://umpir.ump.edu.my/id/eprint/3446/1/cd6247_111.pdf http://umpir.ump.edu.my/id/eprint/3446/ |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Summary: | Thin walled plastic parts are subjected to warpage after injection. Warpage can be overcome by designing ribs. This experimental project is to design a suitable honeycomb ribs replacing the normal ribs to overcome part warping. The parameters included honeycomb ribs height, honeycomb ribs thickness and the honeycomb size. Finite Element Analysis (FEA) simulations for each honeycomb ribs design are analyzed with Autodesk Moldflow Insight software and the part which result the worst warping value, part with medium warping value and part with less warping value were chosen to validate them by fabricating the core and cavity inserts to produce the actual product. The part warping is measured and then compared with the data from the simulation. Thus, the best design parameters of honeycomb ribs are identified. |
|---|