Deburring method of aluminum mould produced by milling process for microfluidic device fabrication
The existence of top burrs in micro-scale features produced by milling process can deteriorate the surface quality of a product. Ductile metals, such as aluminum alloys, are prone to suffer from top burrs formation after a slot-milling process. A brief review on the state-of-the-art of burr removal...
Saved in:
Main Authors: | Saptaji, Kushendarsyah, Triawan, Farid, Sai, Tong Keong, Gebremariam, M. A. |
---|---|
Format: | Article |
Language: | English |
Published: |
Universitas Pendidikan Indonesia
2021
|
Subjects: | |
Online Access: | http://umpir.ump.edu.my/id/eprint/32476/1/Deburring%20method%20of%20aluminum%20mould%20produced%20by%20milling%20process.pdf http://umpir.ump.edu.my/id/eprint/32476/ https://doi.org/10.17509/ijost.v6i1.31852 https://doi.org/10.17509/ijost.v6i1.31852 |
Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
Similar Items
-
Study on end brush deburring and sintered diamond ball deburring of micro-features milled
by: Sai, T. K., et al.
Published: (2019) -
Micro-Milling of Thin Mould for Continuous Productions of Polymer Microfluidic Devices
by: Saptaji, Kushendarsyah
Published: (2016) -
Burr Reduction of Micro-milled Microfluidic Channels Mould Using a Tapered Tool
by: Saptaji, Kushendarsyah, et al.
Published: (2017) -
Regenerative Chatter in End Milling on Mould Aluminum Alloys
by: N. M. Zuki, N. M., et al.
Published: (2008) -
Design and fabrication of Microfluidic devices: MOSFET & Capacitor
by: Osman, R. A., et al.
Published: (2009)