Burr Reduction of Micro-milled Microfluidic Channels Mould Using a Tapered Tool
Moulds with micro-sizes features needed for many applications, such as for hot embossing, can be manufactured using micro-milling process. However, the burrs formed in the micro-milling process are a challenge that needs to be addressed. The burr sizes are comparable to the micro-milled feature size...
Saved in:
Main Authors: | Saptaji, Kushendarsyah, Subbiah, Sathyan |
---|---|
Format: | Article |
Language: | English |
Published: |
Elsevier Ltd
2017
|
Subjects: | |
Online Access: | http://umpir.ump.edu.my/id/eprint/17713/1/fkm-2017-kushendarsyah-Burr%20reduction%20of%20micro-milled.pdf http://umpir.ump.edu.my/id/eprint/17713/ https://doi.org/10.1016/j.proeng.2017.04.078 |
Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
Similar Items
-
Micro-Milling of Thin Mould for Continuous Productions of Polymer Microfluidic Devices
by: Saptaji, Kushendarsyah
Published: (2016) -
Finite Element Study on The Effect of Substrate Properties in Micro-cutting Thin Workpiece Materials
by: Saptaji, Kushendarsyah, et al.
Published: (2016) -
Prediction of burr formation in fabricating MEMS components by micro end milling
by: Ali, Mohammad Yeakub, et al.
Published: (2009) -
Prediction of burr formation in fabricating MEMS components by micro end milling
by: Ali, Mohammad Yeakub, et al.
Published: (2009) -
Deburring method of aluminum mould produced by milling process for microfluidic device fabrication
by: Saptaji, Kushendarsyah, et al.
Published: (2021)