Monitoring tool wear process in turning machine using acoustic emission technique
This project have been conducted in an attempt to monitor the changing of tool wear caused by increasing the cutting speed, through the variation of acoustic emission in turning process, under different feed and depth of cut. The signal-processing analysis was done on the raw signal, on the Acoustic...
Saved in:
Main Author: | Azlan, Mohd Saini |
---|---|
Format: | Undergraduates Project Papers |
Language: | English |
Published: |
2010
|
Subjects: | |
Online Access: | http://umpir.ump.edu.my/id/eprint/1511/1/Monitoring%20tool%20wear%20process%20in%20turning%20machine%20using%20acoustic%20emission%20technique.pdf http://umpir.ump.edu.my/id/eprint/1511/ |
Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
Similar Items
-
Machining surface roughness monitoring using acoustic emission method
by: Mohd Syazlan, Mohd Hatta
Published: (2010) -
Tool wear on parallel turning of carbon steel bar
by: Abdul Wahab, Abdul Aziz
Published: (2012) -
Failure prediction and reliability analysis of ferrocement composite structures by incorporating machine learning into acoustic emission monitoring technique
by: Behnia, A., et al.
Published: (2016) -
Monitoring catastrophic failure event in milling process using acoustic emission
by: Haslan, Mohd Yong
Published: (2010) -
Monitoring fracture of steel corroded reinforced concrete members under flexure by acoustic emission technique
by: Zaki, A., et al.
Published: (2017)