The comparison between thermal pad made of nano-silver and silicon elastomer using computational fluid dynamic (CFD) software, FLUENTTM
This paper presents the comparison between thermal pad made of nano-silver and silicon elastomer by using three dimensional numerical analysis of heat and fluid flow in computer. 3D model of microprocessors is built using GAMBIT and simulated using FLUENT software. The study was made for four microp...
Saved in:
Main Authors: | , , , , , |
---|---|
Format: | Non-Indexed Article |
Published: |
2013
|
Online Access: | http://discol.umk.edu.my/id/eprint/7857/ http://www.ajbasweb.com/ajbas/2013/Special,%20issue2%202013/196-204.pdf |
Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
Summary: | This paper presents the comparison between thermal pad made of nano-silver and silicon
elastomer by using three dimensional numerical analysis of heat and fluid flow in computer. 3D model
of microprocessors is built using GAMBIT and simulated using FLUENT software. The study was
made for four microprocessors arranged in line under different types of materials, inlet velocities and
package (chip) powers. The results are presented in terms of average junction temperature and thermal
resistance of each package The junction temperature is been observed and it was found that the
junction temperature of the microprocessors is not exceed 70º C. It also found that the type of material
in producing thermal pad and inlet velocities are the most important elements to control and manage
the junction temperature. The strength of CFD software in handling heat transfer problems is proved to
be excellent. |
---|