New circuit configuration and control strategy of modular multilevel converter for large scale photovoltaic systems / Ahmed Ibrahim Ibrahim Abbas Ahmed Elsanabary
Photovoltaic (PV) energy markets have been widely spread and are becoming one of the leading energy generation capacities globally. The development of grid-connected PV systems is the main target as it exceeds 99 % of the PV installed capacity due to the comparatively low cost and less maintenanc...
Saved in:
主要作者: | |
---|---|
格式: | Thesis |
出版: |
2022
|
主题: | |
在线阅读: | http://studentsrepo.um.edu.my/14372/1/Ahmed_Ibrahim.pdf http://studentsrepo.um.edu.my/14372/2/Ahmed_Ibrahim.pdf http://studentsrepo.um.edu.my/14372/ |
标签: |
添加标签
没有标签, 成为第一个标记此记录!
|
总结: | Photovoltaic (PV) energy markets have been widely spread and are becoming one of
the leading energy generation capacities globally. The development of grid-connected PV
systems is the main target as it exceeds 99 % of the PV installed capacity due to the
comparatively low cost and less maintenance compared to stand-alone systems.
Nevertheless, the traditional large-scale PV inverters suffer from power loss of the central
maximum power point tracking (MPPT) system, the lack of modularity, the low voltage
ratings, and limitation of the switch power ratings because of the use of central PV
inverters. Modular medium-voltage multilevel converters are very promising to solve the
problems of large-scale PV systems. However, the integration of multilevel converters
into large-scale PV systems suffers from unbalanced power generation during partial PV
shading conditions. This problem is fully addressed in the thesis, and a distinctive
structure of the modular multilevel converter (MMC) for grid-connected PV plant is
proposed. The proposed PV-MMC system provides direct connection of the PV arrays to
the converter submodules, scalability, independent MPPT, enhanced power quality, and
internal power flow capabilities. An energy balancing strategy to control the power flow
inside the PV-MMC converter is proposed. It controls the internally generated leg current
to balance the power flow inside the converter and inject a three-phase balanced current
into the grid. Afterward, a new circuit configuration of the PV-MMC system is proposed
to enhance the balancing capability of MMC under severe power unbalance conditions.
This circuit connects the upper and lower SMs of the MMC in parallel to the same PV
arrays through isolated dc-dc converters. Moreover, a modified control structure is
designed to control the proposed system, which is less complex and yet very effective compared to the other control structures. It deals only with the leg power unbalance
conditions and inject dc leg current into the phases to balance the power flow of the
converter. Simulation and Hardware-in-the-loop tests are performed to demonstrate the
performance of the proposed grid-connected PV-MMC systems. The obtained results
show the capability of the proposed systems to rebalance the power transfer inside the
converter and inject a three-phase balanced set of grid currents. In addition, excellent
dynamic performance of controllers, low measured harmonics (below 5 %), and low SM
voltage ripple (3.98%) are obtained. The objective of the thesis is achieved by
investigating the MMC for the application to grid connected large-scale PV systems. The
related analysis and comparisons show the capability and power quality of the proposed
PV-MMC systems. The proposed energy balancing strategy can eliminate the PV power
unbalance and work under different conditions of solar irradiances. Moreover, the
proposed circuit configuration provides extended balancing capability of the MMC up to
extreme conditions.
|
---|