Tunable multiwavelength Erbium-doped fiber laser based on in-fiber Fabry-Perot interferometer Fiber Bragg Gratings in linear and ring cavity configurations

• Main Authors: Ahmad, Harith, Roslan, N. A., Zaini, M. K. A., Samion, M. Z.
• Format: Article
• Published: Elsevier 2022
• Subjects: QC Physics
• Online Access: http://eprints.um.edu.my/41975/

Multiwavelength Erbium-doped fiber laser (MWEDFL) in the ring and linear cavities operating at 1.5-mu m wavelength region was demonstrated. The multiwavelength fiber laser comprises a 3-m Erbium-doped fiber as an active gain medium, an in-fiber Fabry-Perot interferometer Fiber Bragg Gratings (FPI FBG) as a filter, and a 10-km dispersion compensating fiber (DCF) as a nonlinear gain medium. A comparison investigation was conducted. The MWEDFL in the linear cavity generates 12 stable lasing lines, with an optical signal-to-noise ratio (OSNR) of 45 dB. In the case of MWEDFL operated in a ring cavity, 8 stable lasing lines were generated, with an OSNR of 47 dB. The free spectral range (FSR) of 0.08 nm was measured for the FPI FBG in both linear and ring cavities MWEDFL spectrum. Besides, the stability measurement was conducted for 150 min for both MWEDFL cavities. Both lasers had a peak power fluctuation of less than 1.0 dB and negligible wavelength drifts below 0.1 nm. Furthermore, the wavelength tunability of MWEDFL in both configurations was performed by heating the FPI FBG from 28 degrees C to 100 degrees C. At the temperature of 100 degrees C, the MWEDFL shows a wavelength shift of 1.0 nm, and this can be further increased by heating the FPI FBG to its highest temperature limit. This MWEDFL employs in-fiber FPI FBG offers a compact, highly tunable, and simple design applicable for optical communications and optical sensing applications.