Influence of potassium iodide in polyvinyl alcohol-based gel polymer electrolyte for efficiency enhancement of dye-sensitized solar cells

• Main Authors: Aziz, M. F., Azam, M. A., Yusuf, Siti Nor Farhana, Buraidah, Mohd Hamdi, Mohd Arof, Abdul Kariem
• Format: Article
• Published: Springer 2022
• Subjects: Q Science (General)
• Online Access: http://eprints.um.edu.my/41040/

This study investigates the impact of small cations on improving conductivity and efficiency of dye-sensitized solar cells (DSSCs). The work includes preparation and characterization of polyvinyl alcohol-based gel polymer electrolytes (GPEs) containing tetramethyl ammonium iodide (TMAI) and potassium iodide (KI) salts. The degree of crystallinity of the GPEs has been determined from x-ray diffraction (XRD). From electrical impedance spectroscopy (EIS), the gel polymer electrolyte with only TMAI salt exhibits a conductivity of 1.72 mS cm(-1). On addition of KI salt, conductivity increased up to a maximum of 7.87 mS cm(-1) for the GPE comprising 70 wt. % KI. The dye-sensitized solar cells (DSSCs) with GPE comprising 100 wt. % TMAI - 0 wt. % KI exhibits a short-current density, J(sc) of 6.60 mA cm(-2) and open-circuit voltage, V-oc of 0.56 V. The fill factor, ff, and efficiency, eta, obtained are 79% and 2.92%, respectively. The existence of a small cation K+ in the GPE enhances DSSCs performance with GPE consisting of a 3:7 weight ratio between TMAI and KI exhibits J(sc) of 11.30 mA cm(-2) and V-oc of 0.60 V. The acquired fill factor, ff, and efficiency, eta, are 74% and 5.02%, respectively.