Generation of high-power Q-switched pulses based on arc-shaped fiber and tapered fiber with Sb2Te3 in erbium/ytterbium doped fiber laser

• Main Authors: Ahmad, Harith, Mansor, Nur Hidayah, Ithnahaini, Muhammad Umar Mustaqim, Samion, Muhamad Zharif, Yusoff, Norazriena, Reduan, Siti Aisyah, Yasin, Moh
• Format: Article
• Published: Elsevier 2023
• Subjects: QC Physics
• Online Access: http://eprints.um.edu.my/38471/

This study illustrates the capability of antimony telluride (Sb2Te3) utilized as a saturable absorber (SA) for generating high-power Q-switching in the 1.5-mu m region. First, the exfoliated Sb2Te3 solution was fabricated using the liquid phase exfoliation (LPE) technique and integrated onto a D-shaped and tapered fiber, respectively. Then, the SA was inserted into the erbium-ytterbium-doped fiber laser (EYDFL) cavity. For the arc-shaped fiber-based SA, the passive Q-switched pulses were obtained at 1.34 W threshold pump power, whereas the tapered fiber-based SA has a threshold of 0.4 W. As a result, the highest average Q-switched optical power generated by Sb2Te3-coated arc-shaped fiber was 140.2 mW with a repetition rate ranging from 35.7 to 91.3 kHz and pulse widths from 2.51 to 1.65 mu s. On the other hand, the tapered fiber coated with Sb2Te3 could only generate a maximum average output power of 21.7 mW. Moreover, this SA generates Q-switched pulses with a repetition rate ranging from 5.76 kHz to 39.2 kHz and a pulse width from 5.14 to 16.34 mu s. This indicates that Sb2Te3 can serve its purpose as an SA to produce high-power Q-switched pulses without degradation.