Network reconfiguration and DG output including real time optimal switching sequence for system improvement

• Main Authors: Badran, Ola, Jallad, Jafar, Mokhlis, Hazlie, Mekhilef, Saad
• Format: Article
• Published: Taylor & Francis 2020
• Subjects: TK Electrical engineering. Electronics Nuclear engineering
• Online Access: http://eprints.um.edu.my/26043/; https://doi.org/10.1080/1448837X.2020.1800556

This research proposes an optimal switching sequence path method in order to minimise power losses during the network switching operation. Apart from this contribution, simultaneous optimal network reconfiguration and optimal DG output generation were also presented. The proposed methodology involves (1) optimal radial network reconfiguration and DG output simultaneously and (2) real time optimal sequence of switching operations required to convert the network from the original configuration to the optimal configuration obtained from (1). The proposed method is applied to reduce power losses and improve the overall voltage profile of the system. The chosen optimisation techniques include (EP), (PSO), (GSA), and (FA). To assess the capabilities of the proposed method, simulations using MATLAB were carried out on IEEE 33-bus and IEEE 69-bus radial distribution networks. The obtained results demonstrate the effectiveness of the proposed strategy to determine the sequence path of switching operations, as well as the optimal network configuration and optimal generation output of DG units. For more validation, real-time analysis test using PSCAD/EMTDC software is used to check the voltage stability of the system during switching process. The test proved that the optimal switching sequence does not cause over voltage or under voltage when implemented in real-time conditions. ©, Engineers Australia.