Alloying aluminum with Fe using laser induced plasma technique
A new surface modification technique is demonstrated using laser induced plasma (LIP) to increase the hardness of the surface layer. This LIP treatment provides a very high heating and fast cooling mechanism that can be used to form alloyed layer on a material surface. The hardness of the alloyed ma...
Saved in:
Main Authors: | , , , |
---|---|
Format: | Article |
Published: |
IOP Publishing
2012
|
Subjects: | |
Online Access: | http://eprints.um.edu.my/19924/ https://doi.org/10.1134/S1054660X12080026 |
Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
Summary: | A new surface modification technique is demonstrated using laser induced plasma (LIP) to increase the hardness of the surface layer. This LIP treatment provides a very high heating and fast cooling mechanism that can be used to form alloyed layer on a material surface. The hardness of the alloyed material is measured and the results show that the alloyed surface is 3 times as hard as the un-treated surface and a single Fe alloyed aluminum surface is harder than the one formed by the mixture of Fe and Cu. The microhardness of the alloy increases with the number of pulses at a rate of around 4 HV/pulse. The maximum hardness of 93.0 HV is obtained with the use of single Fe after exposure to 7 pulses of the laser. |
---|