Investigation of the effects of SOA locations in the linear cavity of an O-band Brillouin SOA fiber laser
An investigation into the effect of semiconductor optical amplifier (SOA) location in an O-band Brillouin SOA fiber laser (BSFL) was performed. Better output peak power flatness was generated by placing the SOA after the nonlinear medium, which is a 20 km true wave fiber (TWF) than placing it before...
Saved in:
Main Authors: | , , , , , |
---|---|
Format: | Article |
Published: |
Taylor & Francis
2011
|
Subjects: | |
Online Access: | http://eprints.um.edu.my/19841/ https://doi.org/10.1080/09500340.2011.554894 |
Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
Summary: | An investigation into the effect of semiconductor optical amplifier (SOA) location in an O-band Brillouin SOA fiber laser (BSFL) was performed. Better output peak power flatness was generated by placing the SOA after the nonlinear medium, which is a 20 km true wave fiber (TWF) than placing it before the TWF. A maximum power of six flat output peaks with average power of - 22.0 dBm for a BP (Brillouin pump) wavelength of 1320 nm was obtained, generated from a BSFL with a SOA located after the TWF, compared with three flat Stokes signals with the SOA before the TWF at a BP wavelength of 1310 nm. The flat peak power output for the O-band Brillouin fiber laser is important, especially in producing a good O-band source. |
---|