Effect of Impeller-To-Tank Geometry on Particles Distribution and Just-Suspension Speeds for a Range of Solids Loadings
Particle distribution and just-suspension speeds have been studied for SATAKE SUPERMIX® HR100 and HS604 impellers in comparison to a 45° pitched-blade turbine (4PBT) and propeller (3P) in a flat-base fully baffled cylindrical tank. The slurries were made up of 18.0 µm, 75.3 µm and 195.5 µm diameter...
Saved in:
Main Authors: | Wong, S.D., Ibrahim, S., Zamzam, Z., Kato, Y., Sato, M. |
---|---|
Format: | Article |
Published: |
Society of Chemical Engineers, Japan
2015
|
Subjects: | |
Online Access: | http://eprints.um.edu.my/18638/ https://doi.org/10.1252/jcej.14we059 |
Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
Similar Items
-
Influence of geometry and slurry properties on fine particles suspension at high loadings in a stirred vessel
by: Ibrahim, S., et al.
Published: (2015) -
Solid Suspension Characteristics in a Dished Base Tank for a Range of Geometric and Solids Properties
by: Janurin, Nur Syafiqah, et al.
Published: (2018) -
Particle suspension in the turbulent regime: the effect of impeller type and impeller/vessel configuration
by: Ibrahim, S., et al.
Published: (1996) -
Zwietering's equation for the suspension of porous particles and the use of curved blade impellers
by: Ibrahim, S., et al.
Published: (2012) -
Determination of just-suspension speed for Rushton Turbine using tank bottom pressure measurements
by: Abdul Raman, Abdul Aziz, et al.
Published: (1999)