The synthesis of bio-lubricant based oil by hydrolysis and non-catalytic of palm oil mill effluent (POME) using lipase

• Main Authors: Syaima, M.T.S., Ong, K.H., Noor, Ishenny Mohd, Zamratul, M.I.M., Brahim, S.A., Hafizul, M.M.
• Format: Article
• Language: English
• Published: Elsevier 2015
• Subjects: T Technology (General); TP Chemical technology
• Online Access: http://eprints.um.edu.my/14038/1/The_synthesis_of_bio-lubricant_based_oil_by_hydrolysis_and_non.pdf; http://eprints.um.edu.my/14038/; https://doi.org/10.1016/j.rser.2015.01.005

Synthesis of bio-lubricant from palm oil mill effluent (POME) using enzymatic hydrolysis and noncatalytic esterification has been investigated in this article. The effects of essential parameters, which are temperature, pH, agitation speed, enzyme loading, ratio of oil to fatty acid and alcohol to fatty acid, on the reaction rate were examined. The optimum hydrolysis rate (0.1639 mg/sec.L) was achieved at 40 degrees C, pH 7.0, 650 rpm, 20 U/mL of enzyme loading and 50 (v/v) of POME. As for non-catalytic esterification, the highest reaction rate attained was 0.0018 mg/sec.L at the operating conditions of 75 degrees C, 950 rpm, and alcohol to fatty acid ratio of 3:1. Viscosity and density of the produced bio-lubricant were also evaluated. (C) 2015 Elsevier Ltd. All rights reserved.