Statistical quality control in metal based furniture industry / Nor Faeza Za'abah
The question of the furniture looks so simple on the surface but it becomes very complex when examined closely. Factor of the material used to produce products that are also important aspects. It includes the metal felt. In this project, the furniture is based on the first stage of cutting pieces of...
Saved in:
| Main Author: | |
|---|---|
| Format: | Thesis |
| Language: | English |
| Published: |
2010
|
| Subjects: | |
| Online Access: | https://ir.uitm.edu.my/id/eprint/97338/1/97338.PDF https://ir.uitm.edu.my/id/eprint/97338/ |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Summary: | The question of the furniture looks so simple on the surface but it becomes very complex when examined closely. Factor of the material used to produce products that are also important aspects. It includes the metal felt. In this project, the furniture is based on the first stage of cutting pieces of metal the size of 2438 x 1220 mm. In the first place a piece based on the size of certain components. The main objective of this project is to increase productivity after knowing the cause or reason. Data is collected and recorded to analyze the waste, its applicable to all 16 components to cut loose, mostly supplied to institutions of higher learning such as UiTM. In addition, it also showed the efficiency of employee performance through a clear implication on the quality of the product. Factors affecting the performance of a work are labor, machinery, materials and environment in which errors of one or more of one will lead to worse performance. The combination of components and also cutting design for each component in terms of wastage gives effects. So, for solve this problem, and how a combination of modifications may be cut to reduce waste and maximize utilization. Maximum use of the surplus would reduce the circumstances in which the metal is stored a long time to create additional value. Bar graphs and pie charts are used to shows the results obtained and crossed X and MR charts are used to analyze the data gathered through performance. In addition, it will also launch the processing of measurement accuracy and save time and help to increase sales or income of the company and the industry. |
|---|