Experimental investigation of infill parameters influence on compressive strength-to-mass ratio of PLA 3D printed part / The Jaya Suteja
An infill pattern can be implemented in manufacturing a porous component using 3D Printing technology to reduce the mass of the printed part. The use of an infill pattern and infill angle affects the structure of the printed part. This research aims to investigate the effect of various infill patter...
Saved in:
Main Author: | Suteja, The Jaya |
---|---|
Format: | Article |
Language: | English |
Published: |
Faculty of Mechanical Engineering Universiti Teknologi MARA (UiTM)
2024
|
Subjects: | |
Online Access: | https://ir.uitm.edu.my/id/eprint/89516/1/89516.pdf https://ir.uitm.edu.my/id/eprint/89516/ |
Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
Similar Items
-
Effect of infill parameters on the compressive strength of 3d-printed nylon-based material
by: Liu, Jingjing, et al.
Published: (2023) -
Tensile Characteristics of Low Density Infill Patterns for Mass Reduction of 3D Printed Polylactic Parts
by: M. N. F., Saniman, et al.
Published: (2020) -
A comparison of the flexural properties of PLA and ABS printed parts
by: Sudin, Mohd Nizam, et al.
Published: (2022) -
Investigation of tensile properties of different infill pattern structures of 3D-printed PLA polymers: analysis and validation using finite element analysis in ANSYS
by: Selvaraj, Ganeshkumar, et al.
Published: (2022) -
Effect of printing orientation and layer thickness on microstructure and mechanical properties of PLA parts
by: Abdul Hamid, Rahimah, et al.
Published: (2022)