Improving single phase boost inverter power factor by power factor correction Matlab/Simulink / Mohamad Hafiz Abdan
Power factor is defined as the ratio of the real power, P to the apparent power, S. The value of power factor is between 0 to 1 (unities), which are related to power angle of the system. The low power factor electric system can produce more disadvantages effect such as increase losses and total harm...
Saved in:
| Main Author: | |
|---|---|
| Format: | Thesis |
| Language: | English |
| Published: |
2014
|
| Online Access: | https://ir.uitm.edu.my/id/eprint/85133/1/85133.pdf https://ir.uitm.edu.my/id/eprint/85133/ |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Summary: | Power factor is defined as the ratio of the real power, P to the apparent power, S. The value of power factor is between 0 to 1 (unities), which are related to power angle of the system. The low power factor electric system can produce more disadvantages effect such as increase losses and total harmonic distortion, decrease efficiency system with produce high energy costs. This paper are to design and simulate DC to AC converter with control by Sinusoidal Pulse Width Modulation (SPWM) and install the value of capacitor at resistive load to get new power factor correction greater than 0.85. The output AC voltage at the load is connected to AC power system. The DC to AC converter is included by Boost Chopper and Single-Phase Full Bridge inverter with Resistive load. |
|---|