The design and simulation of radio receiver at the frequency of 2.4GHz / Shazri Hidayat Abd Shukor
This project is about designing and simulating a radio receiver system that operates at the frequency of 2.4G Hz. To make the radio receiver system, three components have to be designed which are antenna, filter and also amplifier. The design started with calculations and then the values were insert...
Saved in:
Main Author: | |
---|---|
Format: | Thesis |
Language: | English |
Published: |
2008
|
Subjects: | |
Online Access: | https://ir.uitm.edu.my/id/eprint/81108/1/81108.pdf https://ir.uitm.edu.my/id/eprint/81108/ |
Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
Summary: | This project is about designing and simulating a radio receiver system that operates at the frequency of 2.4G Hz. To make the radio receiver system, three components have to be designed which are antenna, filter and also amplifier. The design started with calculations and then the values were inserted into computer software using EESof Genesys. The initial circuits have to be simulated to view the performance and improvements to get the best circuits. All these three circuits are then combined to form a radio receiver that operates at the frequency of 2.4G Hz. For the hardware, the antenna was fabricated and tested using V.N.A machine. The results obtained then will be compared with the theoretical values for studies purposes. 2.4G Hz is high frequency and it is chosen because it is specified for Automatic Vehicle Identification (A.V.I) globally. This project will further enhance and can be used for many communication purposes. |
---|