A new flexible antenna for RFID applications / Nur Adyani Mohd Affendi

• Main Author: Mohd Affendi, Nur Adyani
• Format: Thesis
• Language: English
• Published: 2017
• Subjects: Antennas
• Online Access: https://ir.uitm.edu.my/id/eprint/70185/1/70185.pdf; https://ir.uitm.edu.my/id/eprint/70185/

Flexible substrates have drawn considerable interest in providing new opportunities for future applications of telecommunication antennas. This thesis is dedicated to the development and application for an indoor/outdoor wearable antenna such as tagging or identification system for Radio Frequency Identification (RFID) using natural rubber (NR) composites. The thesis is divided into two parts. The first half focuses on the preparation of NR composites to achieve a material with optimal mechanical and electrical properties. The formulation consists of carbon black as the main filler, and other supporting ingredients as activators, anti-oxidants, softeners and accelerators. The preparation process of these samples consisted of mastication, mixing, curing and moulding. To quantify the flexibility of these samples, tensile tests were conducted according to the ASTM D638 standard using an Instron machine. The second half of the thesis concerns antenna development. Meander dipole antennas with a combination of capacitive tip-loading and T-matching were designed using CST Microwave Studio. The substrates employed in the design had permittivity of 3.3 and loss tangent 0.008. The overall dimensions of the antenna are 65 x 65 x 1.0 mm3. The UHF band was chosen with the operating frequency of the proposed antenna selected at 921 MHz. The fabrication of the prototype antennas involved copper foils cut into a meander shape, and then secured onto the rubber surface using a special adhesive. Coaxial feed technique was chosen to ease the fabrication process. Simulation and measurement of the antenna return loss and radiation pattern were conducted over the frequency range of 800 to 1000 MHz under two conditions: 1) flat and 2) bending along vertical and horizontal plane. The effect of the flat and the bending on the antenna's performance, mainly on the return loss and the radiation characteristics also been discussed. The antenna performances show good agreement between the simulated and the experimental results. The measurements were carried out using a Rohde & Schwarz vector network analyzer in an anechoic chamber. At the end of the study, prototype RFID tags were measured using an RFID reader to validate and demonstrate the worthiness of NR as a new flexible substrate for this application.