Effective removal of copper ion from aqueous solution using beads of chitosan-choline chloride or glycerol deep eutectic solvent / Nur Hidayah Sazali … [et al.]
Herein, adsorption process based on new adsorbent was utilized to remove copper ion (Cu(II)), an environmental pollutant, from water. The reprocessing of powder chitosan into a highly porous bead would have the advantage for the industrial treatment of water. Chitosan–deep eutectic solvent (DES) bea...
Saved in:
| Main Authors: | , , , , |
|---|---|
| Format: | Article |
| Language: | English |
| Published: |
Universiti Teknologi MARA Shah Alam
2022
|
| Online Access: | https://ir.uitm.edu.my/id/eprint/66402/3/66402.pdf https://ir.uitm.edu.my/id/eprint/66402/ |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Summary: | Herein, adsorption process based on new adsorbent was utilized to remove copper ion (Cu(II)), an environmental pollutant, from water. The reprocessing of powder chitosan into a highly porous bead would have the advantage for the industrial treatment of water. Chitosan–deep eutectic solvent (DES) beads were prepared from chitosan and DESs. The DESs used were choline chloride–urea (DES A) and choline chloride–glycerol (DES B). Both chitosan–DES beads were used to remove Cu(II) from an aqueous solution. Based on the characterisation results, chitosan-DES A showed a higher chemical and thermal stability when compared to chitosan-DES B. For type of adsorbents, chitosan-DES B showed a higher removal percentage of Cu(II) (90.92 %) than chitosan-DES A (7.5 %). Therefore, chitosan-DES B was chosen as the preferred adsorbent for Cu(II). The optimum conditions for the removal of Cu(II) from aqueous solution were using 0.09 g of chitosan-DES B with 40 min of shaking time and 1 mg L-1 of initial concentration. |
|---|