The effect of cooling process after weld using tensile and impact tests of mild steel joint / Zairee Ezzam Zahuri
The aim of this research is to investigate experimentally the three different methods of cooling process (normalizing, spray quenching and normal quenching) after weld. The goal of research is to investigate whether spray quenching method are suitable after weld compares between normalizing and norm...
Saved in:
Main Author: | Zahuri, Zairee Ezzam |
---|---|
Format: | Thesis |
Language: | English |
Published: |
2010
|
Subjects: | |
Online Access: | https://ir.uitm.edu.my/id/eprint/64052/1/64052.pdf https://ir.uitm.edu.my/id/eprint/64052/ |
Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
Similar Items
-
The influence of welding parameters and corrosive environment on the joint strength of resistance spot-welded mild steel sheets
by: Ahmad Azid Tahar, Ahmad Latiffi
Published: (2008) -
A study case of dissimilar welding between mild steel ( Low Carbon Steel ) and stainless steel on hardness vickers and tensile shear test for gas tungsten arc welding ( GTAW )
by: Ahmad Safwan, Salim
Published: (2008) -
The influence of welding parameters and corrosive environment on the joint strengh of resistance Spotwelded Mild Steel Sheets
by: Shamsul Baharin, Jamaludin, et al.
Published: (2009) -
Study on properties of dissimilar metal welding between stainless steel (AISI 304L) and mild steel (AISI 1018). / Mohd Soleham Juraimi Kamarudin
by: Kamarudin, Mohd Soleham Juraimi
Published: (2009) -
The effect of varied welding currents and cycles on thin sheet mild steel with heat treatment process for resistance spot weld
by: Mohamed Faisol Mohamed Nor
Published: (2008)